VISION VFM-W4X4T Heavy-duty tilting wall mount

Vision's Vision Flat-panel Mount - Wall product line was designed by Vision's engineering team for professional AV installers. This holder is uncompromising: very strong, quick to install, well adjustable, everything is included. The VFM-W4X4 fits any flat panel LCD or LED screen with rear mounting holes up to 400W x 400mmH.

Hard service

Interactive flat panels are large and very heavy. The Vision VFM-W4X4T uses a heavy-duty sheet metal to safely support a weight of up to 100kg/220lbs.

Everything is included

The Vision includes everything you need, including various lengths of M5, #6, and #8 screws that attach the vertical arms to the back of the display.

For 32-75 inch display

Fits most 32-75 inch displays subject to VESA pattern and weight limitations. Note: this mount does not support curved screens.

ADA Compliant

The slim design keeps the display only 45 mm from the wall. This looks better, reduces the risk of pinching, and since the load is close to the wall, the bracket has a higher safe working load.

Designed for professionals

The well-proven design allows for quick fixing, and the slotted holes on the wall part allow you to adjust the leveling after fixing.

Locks securely

The display locks on the horizontal portion when the display is hung in place. Snap the plastic pull rods down to the correct length to hide them behind the display. To release the display, pull down the pull bars.

Beside each other

Two horizontal sections can be attached side by side for dual-display video conferencing or conference room applications. Or extend the horizontal to bridge wide load-bearing points in the wall.

Hide media player

Thoughtfully placed VESA 100 x 100 mm holes on the horizontal part allow the slim media player to be mounted behind the display out of sight.

Optional laptop shelf

The optional shelf can be attached to the horizontal part of the wall bracket at four different heights in 80 mm (3.1") increments. The platform is 450 mm (17.7") wide and 306 mm (12.0") deep. At its lowest height adjust the A shelf is 680 mm (26.8 in) below the center of the screen Item No: VFM-WLS [EU SAP: 4857149 / US SAP: 13557610]

Video conference shelf

The optional shelf can be fixed above or below the display in the middle. Any camera, including the Logitech Rally, can be mounted on the shelf. It is designed to attach the Yamaha YVC-1000, the Barco Clickshare CSE-200 base station or the Logitech Meetup wall mount to the vertical section. With the VESA 100 x 100 mm holes on the vertical part, a product such as the Heckler Zoom Room iPad case can be attached. Article number: VFM-WVC [EU SAP: 5048878 / US SAP: 13557673]

12° tilt angle

Ideal for applications where the display is mounted high, this mount tilts to point the display downwards.

Description:

- Width: 44.5 cm
- Depth: 4.45 cm
- Height: 43.5 cm
- Weight: 3.5 kg
- Material: cold rolled steel
- Colour: Black
- Package contents: 4 x M6x16 screws, 4 x M6x25 screws, 4 x M5x16 screws, 4 x M8x16 screws, 4 x M8x35 screws, 2 x M8x45 screws
- Type: console
- Design: tiltable
- Suggested use: Media player / LCD display
- Placement / Fixing: Can be mounted on the wall
- VESA mounting surface: 100 x 100 mm, 200 x 200 mm, 400 x 300 mm, 400 x 200 mm, 400 x 400 mm, 300 x 300 mm, 350 x 350 mm, 300 x 400 mm
- Recommended display size: 32"-75"
- Decision: 12°
- Settings: Decision
- Maximum load capacity: 100 kg