SHELLY Qubino Wave i4 Smart Module Z-Wave EU Long Range Version

Shelly Qubino Wave i4 is a smart module, a member of the Shelly Wave product line, which uses Z-Wave protocol for communication (868.42 MHz in Europe). Since Z-Wave is a smart home protocol, it was developed specifically for communication between smart devices. Thanks to the Subgigigaherces frequency, the signal spread is appropriate, and thanks to the Z-Wave Mesh network topology, devices farther from the central unit are able to commune properly (it acts as a signal transmission under constant dedication). The Z-Wave devices must definitely need a Z-Wave Hub or a USB coordinator to operate (for example, a minipc). The Z-Wave protocol uses standardized communication command classes (up to hundreds of different brands of different brands compatible with each other, and the tools of a Z-Wave system can work together with a network. A Z-WAWE network max. It may contain 232 devices. Another advantage of the Z-Wave protocol is to support association groups (Association Groups), which allows us to create direct collapses among the individuals that make up the network. Another advantage of Z-WAVE devices is that they can set many parameters at the protocol level, so they can meet the most sophisticated needs. Long Range Version

The Shelly Wave i4 smart module does not contain output relay, which is capable of input in the fitting box, mounted behind the switch/button. Thus, it senses the status change of conventional switches/buttons connected to the module's terminals. 12 VDCs from the DC, (on a separate terminal) 24-48 VDC and 230VAC alternating voltages, and between the output terminals the control is used with dry contact. The manufacturer also provided the manufacturer with overheating protection, so it guarantees safe operation in a small space mounted in wall sockets.

Pairing:

The module has a "S" button, which is a function key.
During pairing, removal or factory reset, you can start the processes. These functions are available for a limited time after placing it under the power.

Pairing/Removal/Factory Restore:

Press and hold the "S" button to pair until the status indicator turns to blue.
Pressing the "S" button directly (at min 2 seconds) starts the pairing/removal status.

Z-Wave Hubs:

Shelly tested with the following Z-Wave Hubs:

- Home Assistant
- Home Center 3
"Jeedom
- Homey
- Smartthings
- Hubitat

Product features:

- 230V AC phase zero
- Supports button combinations (3 functions per button) Total 12 options per module (1x, 2x, HOLD DOWN)
- Directly Control of other Z-Wave devices with Association features 8 options per module (1x, HOLD DOWN)
-Ideal for Shelly Wall Switch switching (1-2-4 button versions)
- Other 230Vac input states may be suitable for detecting or phase monitoring

Specifications:

- Input: Waiting a phase for "I" input terminals
- Power voltage: 230 VAC
- Low standby consumption: 0.3 W.
- Communication Protocol: Z-Wave 800
- Z-Wave frequency: 868.4 MHz (EU)
- range: up to 40 meters within a building (walls slabs can reduce)
- Smartstart: Yes
- S2 encryption: Yes
- Z-Wave Repeater Function: Yes
- Wireless Firmware Update (OTA): Yes
- Operating temperature: -20 +40 ° C
- Size: 37 x 42 x 16 mm
- Weight: 37g

Installation:

- Typically in the normal size fitting box, but the deepened assembly box is recommended, its use will accelerate the modules' installation time
- Din-rail with adapter (separate product) can be mounted on a hat color

Shelly Wave i4 needs a constant 110-240V AC power supply.

Expects the same tension on the four switch inputs and

- senses whether the switch is turned on/on,
- Or, if not used for a switch, it senses whether there is electricity in that circuit.

Wave i4 compatible with Shelly's new electric switch family with a four-button "scene controller" switch, snapping it to the back to simply create commands to control other devices (whether group or scenes) in the Shelly system.

(The four -button wall switch is not the Shelly Wave i4, but a separate product.)

Like other smart release, this requires not only a phase conductor but also a zero conductor.

Description:

- Manufacturer: Shelly
- Color: orange

Operation / Operation

- Operating power supply: 110V-240V AC
-Din-rail mounted: Yes, with DIN-Adapter (separate product), yes, with Shelly DIN adapter (separate product)
-Operating ambient temperature: 20 ° -40 ° C, -20 ° C-40 ° C

Electricity properties

- Local / manual switching: No
- Input for external switch: yes, 4 switch inputs
- alternative switching