The Ermenrich Zing TC14 digital multimeter with Smart function is a portable electrical measuring and testing device for professional and home use. When you turn it on, it automatically detects the incoming signal and takes measurements. The Smart function works in all measurement modes except frequency measurement. If necessary, you can also operate the device manually by pressing a button. The device automatically sets the measurement limit in any operating mode. All measurements are based on the True RMS value.

In this model, we combined the tear test with the resistance measurement method. It has NCV function which is used to identify the location of hidden wires and phase detection. If you work in conditions where it is difficult to read the multimeter screen, it is recommended that you try the hold function. Press the button to "freeze" the measured values ​​so that you can read them later.

This compact device does not take up much space in your toolbox. The multimeter is equipped with a built-in flashlight for convenient use even in poorly lit areas. The device works with standard batteries. The device also has a battery-saving function: the automatic switch-off function is activated if the device is not used for a long time.

Main characteristics:

- True RMS – high measurement accuracy by measuring non-sinusoidal signals
- Measurement of direct and alternating current (DC and AC) voltage, resistance and frequency
- Automatic signal recognition (in case of voltage, resistance, rupture test)
- Hold function, non-contact detection of hidden wires, phase detection
- Works with two easily replaceable, standard batteries

The set includes:

- Digital multimeter
- Measuring probes
- User manual and warranty card

- Selection of the measurement limit value is automatic
- DC (direct current) voltage measurement limit 4/40/400/600 V: error ±(0.5%+3)
- AC (direct current) voltage measurement limit 4/40/400/600 V: error ±(0.8%+3)
- Resistance measurement limit 4000 Ω/40 kΩ/400 kΩ/4 MΩ/40 MΩ: error ±(1.0%+5)
- Frequency measurement limits 4 Hz/40 Hz/400 Hz/4 kHz/40 kHz/200 kHz: error ±(1.0%+3)
- Non-contact voltage detection (NCV detection) ✓
- True RMS ✓
- Hold function ✓
- Automatic recognition function (Smart) + (only for DC and AC voltage, resistance and rupture testing)
- Phase detector (Live) ✓
- Overvoltage category CAT III 600 V
- Screen VA
- Display countdown 4000
- Display backlight ✓
- Flashlight ✓
- Safety standards EN61010-1,-2-030; EN61010-2-033; EN61326-1
- Tear test +, with resistance measurement mode (