SHELLY ALL-REL-WAVE1 Qubino Wave 1 egy áramkörös okosrelé blue

The Shelly Qubino Wave 1 smart relay module is a device that can be installed in an assembly box and can control a circuit. The Shelly Wave product family uses the Z-Wave protocol for communication, so you will definitely need a Z-Wave Hub or USB coordinator to use the relay module. The module can be powered by DC and AC voltages and has a dry contact output. It is also equipped with protection against overheating, so it guarantees safe operation even in a small space installed in wall sockets.

The Shelly Qubino Wave 1 smart relay module is a member of the Shelly Wave product family, which uses the Z-Wave protocol for communication (868.42 MHz in Europe). Since Z-Wave is a smart home protocol, it was specially developed for communication between smart devices. Thanks to the sub-gigahertz frequency, signal propagation is adequate, and thanks to the Z-Wave MESH network topology, devices further away from the central unit can also communicate properly (devices under continuous power supply act as signal transmitters). Z-Wave devices definitely need a Z-Wave Hub or USB coordinator (which is connected to a miniPC, for example) to work. The Z-Wave protocol uses standardized communication command classes (Command Class), so even hundreds of thousands of products from different brands are compatible with each other, devices of a Z-Wave system can work together forming a network. A Z-Wawe network max. It can contain 232 devices. Another advantage of the Z-Wave protocol is that it also supports association groups (Association Groups), thanks to which we can create direct associations between the individual units that make up the network. Another advantage of Z-Wave devices is that many parameters can be set on them at the protocol level, so they can be customized to meet even the most sophisticated needs.

The Shelly Wave 1 smart relay module can be powered by direct current 12 VDC (on a separate terminal), 24-48 VDC and 230VAC alternating current voltages, and the control is arranged with a dry contact between the output terminals. The manufacturer also equipped the module with protection against overheating, so it guarantees safe operation even in a small space installed in wall sockets.

Pairing:

The module has an "S" button, which is a function button.
During pairing, removal or factory reset, we can start the processes with this button. These functions are available for a limited time after powering up.

Pair/Uninstall/Factory Reset:

Press and hold the "S" button to pair until the status LED turns blue.
Then directly pressing the "S" button again (for at least 2 seconds) starts the pairing/removal state.

Specifications:

- Output: Dry contact
- Maximum Current: 230 VAC 16A (with resistive load), 30 VDC 10A (with resistive load)
- Low standby consumption: 0.3 W.
- Communication protocol: Z-Wave 800
- Z-Wave frequency: 868.4 MHz (EU)
- Range: up to 40 meters inside a building (walls can be reduced by slabs)
- SmartStart: YES
- S2 encryption: YES
- Z-Wave repeater function: YES
- Wireless firmware update (OTA): YES
- Operating temperature: -20 +40 °C
- Size: 37 x 42 x 16 mm
- Weight: 37g

Can be installed:

- It typically fits into the normal size assembly box, but the recessed assembly box is recommended, its use speeds up the installation time of the modules
- It can be mounted on a hat color with a DIN-rail adapter (separate product).

Like other smart relays, this one requires not only a phase conductor, but also a neutral conductor for its operation.

Description:

- Manufacturer: Shelly
- Product type: Smart Z-Wave switching relay, also for voltage-free switching
- Color: Blue

Installation / operation

- Operating power supply: 110V-240V AC, 12V DC, 24V-240V DC
- Connection: 12V DC, 24V-240V DC, AC (phase and neutral)
- Fixing/mounting: Can be mounted in a wall socket or can be mounted on a DIN rail using a DIN rail adapter, which can be ordered separately
- Can be mounted on DIN rail: Yes, with Shelly DIN adapter (separate product)
- Operating ambient temperature: 20°C-40°C
- Operating ambient humidity: 30%-70% RH
- Max. energy consumption: 0.3W

Controlled (/measured) circuit

- Switch / switch relay: Yes
- Dimming / Brightness control: No
- Consumption measurement: No
- Number of circuits: 1
- Number of switched poles: 1P
- Potential-free switching: Yes
- NO/NC switching: No
- Nominal voltage: Voltage-free (dry) contact, max. 240V AC, max. 30V DC
- Nominal current: 16A (AC), 10A (DC)

Electrical properties

- Local / manual switching: No
- Input for external switch: Yes
- Alternative switching / crossover switching: Yes
- Overheating protection: Yes

Supported protocols

- Wi-Fi: No
- Zigbee: No
- Thread: No
- Z-Wave: Yes, also a Z-Wave repeater
- RF / radio control: No
- Bluetooth: No

Remote control, smart control

- Direct (local) remote control: No
- Can be controlled remotely via the Internet: