The Sencor SWS 7300 wireless weather station is an excellent choice for getting to know basic weather conditions quickly and easily. It indicates the expected weather using several icons on the LCD display. You have the option to set an alarm with a repeated alarm or snooze function. You can track the different phases of the moon, and thanks to the device's calendar function, you will always know what day it will be. Up to 8 sensors can be connected to the devices.

Humidity display

The humidity of the given room is displayed using % values. The air in the room is dry if the values ​​are between 20 and 40%. Ideal values ​​are between 45 and 65%. If the displayed data falls between 66 and 95%, the air in the given room is very humid.

Save measured data

It is possible to save the minimum and maximum values, so you will always have accurate data. Data can be backed up in almost an instant.

Wake-up and snooze function

The sencor weather station is equipped with the snooze function that has become well-known by smartphones. If the alarm goes off at the set time, but you still want to sleep a little longer, just press the snooze button and rest longer. A few minutes later, the alarm will sound again.

Moon phases

The moon has no light of its own, it only reflects the light of the sun. During its orbit around the earth, its illumination is constantly changing due to changes in the positions of the sun-earth-moon system. A cycle takes place in an average of 29 days 12 hours 44 minutes, which is the length of the synodic lunar month. The moon phase appears on the display as an illuminated part of the gradual transition of each phase. Its lunar cycle means the following order: new waxing crescent, first quarter, waxing moon, full moon, waning moon, third quarter, waning crescent.

Communication on a frequency of 433 mhz

The external and internal units of the sencor weather station communicate with each other via the 433 MHz frequency. The range of the radiation is approximately 30 meters between the transmitter and the station. During installation, it is important to note that devices operating at a similar frequency may cause interference.

Radio Controlled Clock - DCF-77

The DCF77 is a long-wave atomic time-spin transmitter. High-precision time determined by an atomic clock has been used for radio frequency am mode broadcasting since 1978. The sencor weather station shows the dcf signal reception of the device using a separate icon.

Features:

- 5.4" i.e. 13.8 cm diagonal display
- Weather forecast icons (sunny, slightly cloudy, cloudy, rainy, snowy)
- Indoor and outdoor temperature and humidity display, with forecast
- Barometric pressure in relative and absolute value
- Dew point and Temperature index
- Max./min. save to memory with time-date stamp
- Hourly backup for the last 24 hours
- High/Low warning setting (outside/inside temperature and humidity)
- The display will flash to draw attention to the High/Low warning
- Display the time, calendar, weekday and moon phase
- Icing warning
- Radio-controlled time and date using DCF-77 signal, updating to summer time (DST) (manual setting possible)
- Date and day of the week (day of the week in 7 languages: EN/IT/ES/DE/FR/NL/RU)
- Temperature displayed in °C / °F degrees
- 3 levels of brightness: High/Low/Auto brightness
- Solar panel for automatic backlight brightness adjustment
- Can be mounted on a table or wall
- 8 sensors can be connected
- 1 sensor accessory (SWS TH8700-8800-7300)
- The transmission distance between the main unit and the receiver is max. 30 m (in open ground)
- The radiation frequency of the sensor: 433 MHz

Technical information:

- Internal temperature measurement range: -5 - +50°C
- External temperature measurement range: -40°C - +60°C
- Internal humidity range: 20% - 90% RH
- External humidity range: 1% - 99% RH
- Main unit power adapter: DC (direct current) 5 V/1000 mA (included in the package)
- Spare battery for the main unit: 1 x CR-2032 3 V (included in the package)
- Heat sensor power supply: 2 x 1.5 V AA type batteries (batteries are not included in the package)
- Dimensions of the main unit: (width / height / depth) 118 x 192.5 x 21 mm
- Sensor size: (width / height / depth) 61 x 113 x 39.5 mm
- Weight of the main unit: 280 g (including battery, without adapter)
- Sensor weight: 92 g