RAINPOINT ICS018 Digital water meter

Rainpoint digital water meter combines the highest accuracy with a robust, waterproof design, offers four measurement modes (flow rate, last consumption, two total counts), while it operates with a single CR2032 element with an easy -to -read display. Intuitive controls allow you to rotate the display and switch between units and reset data by pressing a single button. Automatically turn off the screen after a minute of inactivity and to measure the flow in both directions increases the comfort of use. Rainpoint is ideal for the garden, a camper, a watering or pool.

In all details of accuracy and reliability
Rainpoint is a digital water flow meter with an advanced hall sensor and a special IC (integrated circuit, chip) chip set that guarantees ± 3%measurement accuracy. As a result, you will receive reliable data on current water consumption, regardless of the circumstances and the type of installation. Lack of restrictions on flow and free change of screen orientation are characteristics that raise this meter above standard competitive products.

Full protection against moisture
Rainpoint cares not only for accuracy but also for durability. The waterproof battery holder with a leak and silicone ring guarantees the long life and resistance of the device for outdoor conditions (IPX6 protection class). Rain, splash or accidental immersion are no obstacle.

Full control of measurement
The meter offers four independent reading modes: current flow speed, last consumption (last), and two total counters (Total 1 and Total 2). Thanks to its extensive features, you can track short and long -term data, compare the consumption of different periods and plan savings. Do you want to start a new measurement series? No problem! Just hold down the menu button and all values ​​are zero. In addition, Rainpoint does not determine the direction of the flow - you can treat both water inputs and outputs as an input and, if necessary, can change the direction of reading by pressing a single button.

Battery power
Rainpoint works with a single CR2032 element - it takes only a few seconds if necessary. When the energy level is reduced, there is a clear warning symbol on the display that reminds you of replacing the battery. If you do not use the meter for more than one minute, your display will automatically be discharged to protect the battery. Thus, Rainpoint operates for a longer period of time, even with high stress.

Ergonomics and intuitive treatment
You can rotate the LCD (a liquid crystal display) with a short press so you can always read the data, regardless of the recording mode. On the flow measurement side, hold the Menu button pressed from GAL/MIN to L/Min or GAL to L, so that the device becomes universal for different measurement systems.

- Measurement accuracy: ± 3%
- Waterproof: IP54
- Reading modes: Current flow rate, last consumption (last), two total counters (total 1 and 2)
-Operating pressure: 0.5-10 bar (7.25-145 PSI)
- Measurement range: 0-9999 l
- Water flow range: 0.5 ~ 45.5l/min
- Power Supply: It works with an item (an item CR2032)
- Operating temperature: 5 ℃ -40 ℃
- Display: LCD