PREMIUMCORD khext60-1 4K HDMI extender

- Supports 4K@30Hz, Full HD 1080P resolution up to 60m
- The HDMI Signal amplifier consists of TX tax and RX receiver
- Input and output connectors of tax and receiver: HDMI Mom
- Tax and customer connectors: RJ45 Mother
- To combine TX and RX, use a high quality 1x LAN cable
(Use a copper cable with AWG23 wires for 60m distance such as UTP CAT6 cable with SUTPD6C3 meters)
- 3x3.4GBPS transmission speed with HDCP support
- Bandwidth: 340MHz
- resolutions: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 4K@30Hz
- The sign amplifier HDMI is transmitted digital image and sound
- The signal amplifier should not be connected to an active computer network, switch, router or other device to another active network device. The signal amplifier tax and receiver must be connected directly with a LAN cable directly, preferably without interruption.
- The length of the input and output HDMI cables is up to 10 m, with AWG26 cable length (AWG26 for cables 7 m and 10 m).
- The tax and buyer are fed by the supplied 230V/5V, 1A network adapters.
-The units have a practical EDID button, which, after holding longer, is the resolution from Full HD 1080p to 4k@30Hz and vice versa.
- The tax and receiver has LEDs indicating when the units are connected and the signaling is in progress.
- A blue LED indicates the power of the power supply, during operation this LED blinks red and indicates an active HDMI signal.
- Operating temperature: -15 to +55 ° C.
- Tax and receiver dimensions: 81mm x 47mm x 22mm