The secret code for optimal protection

- Automatic restart when AC is restored
- Excellent microprocessor control guarantees high reliability
- Boost and strengthen the automatic voltage regulator to stabilize the voltage
- Charging in the off state
- Simulated sine wave
- Cold start function
- User-friendly LCD
- Software management
- Overload and overvoltage protection
- Lightning and surge protection

This uninterruptible power supply is recommended in situations where a simple, affordable, rack-mountable system is needed without other special requirements. A perfect solution for security/CCTV systems and environments that do not require heavy loads but also have built-in rack management.

Software management
Take control of your automated electronic architecture with software management available on Code. You can select all performed actions and define the time frame.

LCD monitor
Critical information about the operation of the uninterruptible power supply is conveniently displayed on the LCD display, easy to monitor and act on when necessary.

Rack mounting
Mounting in a rack is necessary to save space or for protection in the case of multiple uninterruptible power supplies.

Specifications
- Capacity: 800 VA/480 W
- Type: Linear interactive
- Nominal input voltage: 230 V AC
- Allowed input voltage range: 162 V ~ 290 V AC
- Input frequency range: 60 Hz/50 Hz (automatic detection)
- Phase: With single-phase earthing
- Rated output voltage 230 V AC
- Permissible output deviation range: ± 10%
- Output frequency range: 50 Hz or 60 Hz ± 1% (battery mode)
- Waveform: Simulated sine wave (battery mode)
- Changeover time: from AC mode to battery mode: Typical 4 ms, maximum 10 ms
- Efficiency: AC mode: ≥ 95% with fully charged battery, Battery mode: ≥ 60% with fully charged battery
- LCD display: Uninterruptible power supply status, load level, battery charge level, input/output voltage
- Alarm: Battery mode, low charge, overload, error
- Full protection: Protection against overload, discharge and overcharge
- Input: 1 IEC C14
- Output: 4 IEC C13
- Temperature: 0°C ~ 40°C
- Humidity: 0% ~ 90%
- Noise level: less than 40 dB
- Battery: 1 GP09122L, sealed and leak-free
- Charging current: Maximum 1 A
- Typical recharge time: 4-6 hours for internal battery to 90% capacity at 1A charging current
- Bridging time: 25% load: 15 minutes, 50% load: 5.5 minutes, 75% load: 20 seconds, 100% load: 1 second
- Connection port: USB port
- Software: Monitoring and control via USB, ViewPower
- Size: 230mm x 438mm x 86mm
- Weight: 7.7 kg

Due to the natural wear and tear of the battery, it is covered by a 1-year warranty.