Full-color camera with SONY Exmor 2.1 MP digital CMOS sensor. The sensor is illuminated from behind, thereby reducing light scattering and increasing the sensitivity of the matrix (8935 mV at 1/30 sec). The camera takes clearly visible and clear images even in low light conditions. Can be used with 40x, 60x and 100x magnification objective for dark field and bright field examinations.

The camera can be mounted on the microscope in two ways: in the three-eyepiece tube with a C-thread adapter or in the tube, using the adapter and adapter rings, in place of the eyepiece. It is recommended to use a 0.6x-0.9x magnification adapter for the camera, which provides the widest possible field of view without distortion. After installation, the camera is connected to the computer via a USB 3.0 port with a data transfer speed of 5 Gbps.

The MAGUS View software is used to display images on a monitor, record photos and videos, and perform other operations. In the package you will also find a disk containing the software and drivers. Please note: before starting, the software must be calibrated for each lens used. To do this, you will need a special calibration slide (sold separately).

The image is displayed on the monitor in Full HD (1920x1080 px) format at 96 frames/sec. The transition of the frames is smooth, without delay, so the camera can be used well for observing moving objects, including presentations during lectures or scientific presentations.

- 2.1" CMOS sensor with backlight, high matrix sensitivity
- Suitable for studying with dark field or bright field 40x, 60x and 100x objectives
- Can be installed in the three-eyepiece tube / eyepiece tube of the microscope
- Full HD resolution (1920x1080 px) at 96 fps, perfect for studying moving objects
- Can be connected to a computer via a USB 3.0 port with a data transfer speed of 5 Gbps
- Software and drivers included

Contents of the set
- Digital camera
- USB cable
- Installation CD with drivers and software
- User manual and warranty card