LINDY 100m Cat.6A USB 3.2 Gen 1 HDBaseT Extender

With this Lindy USB 3.2 Gen 1 Cat.6A extender, the distance between USB peripherals and the host computer can be increased by up to 100 meters. It supports multiple USB signals, control, bulk, interrupt and isochronous data transfer.
A standard Cat.6A or larger network cable* (not included) is used to bridge the connection between the transmitter and the receiver over the maximum supported distance of 100m (328.08ft). It can reach up to 40 meters with a Cat.6 cable.

The Extender has a power cable that requires a single power supply to be connected to the transmitter or receiver. The receiver's 4 type A ports can also provide 5 V power supply for the connected devices; It supports 2 ports up to 1.5A each and 2 ports up to 1A.

Status LEDs help the user check power, transmitter-receiver connection, and data transfer progress, while additional RS232 and FSYNC GPIO pass-through ports allow bidirectional commands to be sent to industrial cameras as well.
With a robust metal housing and support brackets, this Extender is an ideal solution for professional applications and industrial environments.

In addition, the power supply connects via a screw-on DC connector, providing a safer and more reliable connection, perfect for professional installations where accidental disconnection can be a serious problem.

*: For long distances close to the 100m limit, we recommend using HDBaseT-certified Cat.6A (or higher) cables.

HDBaseT is a globally recognized standard for high-quality distribution of AV content and other technologies, including power and control, over longer distances via inexpensive Cat.6 or higher cable.

The HDBaseT trademark and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. When using other types of cable, the introduction of wall plates, connectors or patch panels results in a reduction of possible distances.

- Extend 4 USB 3.2 Gen 1 ports to 100m with a Cat.6A network cable (not included)
- The power cable only requires a single power supply, which only needs to be connected to the transmitter or receiver
- Supports USB 3.2 Gen 1 (USB 3.0) up to 5 Gbps, USB 2.0/1.1 backward compatibility, RS232 and FSYNC pass-through ports
- Plug & Play installation