The Ermenrich Zing TC35 digital multimeter combines the functions of several electrical measuring devices, which are: voltage measurement, current measurement, resistance measurement, capacitance and frequency measurement. It can measure the duty cycle and determine the temperature. The measurement limit value can be selected manually or automatically. The multimeter has a compact, lightweight, color display with numbers and a graphic scale. The backlight of the screen and the built-in flashlight make it easier to work even in low light conditions.

A unique feature of the multimeter is the relative measurement (REL) function. When the button is pressed, the system saves the reference point in memory and continues to calculate the difference between the new value and the reference point. It is an intelligent device capable of performing measurements in fully automatic mode: the Smart function can be used for voltage, resistance and rupture testing. The device can be switched to manual control at any time to use all functions.

The multimeter also has additional modes, which are the following: break test, diode test, phase detection, non-contact high voltage detection (NCV). It has a hold function and a limit value memory function. The device is powered by a battery.

Main features:

- Multifunctional measuring instrument: voltage measurement, current measurement, resistance measurement, capacitance measurement, frequency measurement, duty cycle measurement, thermocouple-based temperature detection
- Set reference points for relative measurements
- Smart mode for automatic resistance measurement, voltage measurement and rupture test
- Diode test, break test (open and short circuit detection), non-contact location of hidden wires (NCV), phase detection
- Color screen with graphic scale and numbers, backlight for working in dark areas
- Built-in flashlight, hold function, battery operation

The set includes:

- Digital multimeter
- Measuring probes
- Case
- User manual and warranty card

- Selection of the measurement limit value is automatic, manual
- DC (direct current) voltage measurement limit 99.99 mV/999.9 mV/9.999 V/99.9 V/1000 V: error ±(0.5%+3)
- AC (direct current) voltage measurement limit 99.99 mV/999.9 mV/9.999 V/99.9 V/750 V: error ±(0.8%+3)
- DC current measurement limit value 9.999/99.99/999.9 mA: error ±(0.8%+3), 9.999 A: error ±(1.2%+3)
- AC current measurement limit value 9.999/99.99/999.9 mA: error ±(1.0%+3), 9.999 A: error ±(1.5%+3)
- Resistance measurement limit 99.99 Ω/999.9 Ω/9.999 kΩ/99.99 kΩ/999.9 kΩ: power ±(%0.8+3), 9.999 MΩ/99.99 MΩ: power ±(% 1,2+3)
- Capacitance measurement limit 9.999 nF/99.99 nF/999.9 nF/9.999 µF/99.99 µF/999.9 µF: error ±(4.0%+3), 9.999 mF/99.99 mF: error ± (5.0%+5)
- Frequency measurement limits 99.99 Hz/999.9 Hz/9.999 kHz/99.99 kHz/999.9 kHz/9.999 MHz: error ±(1.0%+3)
- Duty cycle measurement range 1–99%: error ±(1.0%+2)
- Diode test ✓
- Non-contact voltage detection (NCV detection) ✓
- True RMS ✓
- Hold function ✓
- Limit value function (Min/Max) ✓
- Relative value measurement (REL) ✓
- Automatic recognition function (Smart) + (only for DC and AC voltage, resistance and rupture testing)
- Phase detector (Live) ✓
- Overvoltage category cat. III (1000 V) IV (600 V)
- Screen VA
- Display countdown 10000
- Graphic scale ✓
- Flashlight ✓
- Safety standards EN61010-1,-2-030; EN61010-2-033; EN61326-1
- Operating temperature range, °C –40… +1000 °C: error ±(1.0%+3)
- Continuity test ✓
- Power supply 3 AAA batteries (not included in the set)
- Low battery indicator light ✓
- Automatic shutdown ✓