The Ermenrich Zing TC32 digital multimeter comes in handy in all situations where you need to measure current, voltage and resistance as well as frequency, capacitance and duty cycle. A thermocouple-based sensor measures the temperature. The multimeter is used to check the components of electrical equipment, test electrical equipment and devices, and maintain electrical networks. Ermenrich Zing TC32 can be used by both professional users and beginners thanks to its wide range of functions.

In addition to measurements, the multimeter can also perform various tests: diode testing, checking networks for shorted or open circuits, hidden wires, or identifying the location of live sockets and detecting the phase. The measurement results are displayed as a digital display and a graphic scale on the screen. The screen is backlit for low light conditions, and the hold function allows you to keep the last measurement on the screen.

The Ermenrich Zing TC32 multimeter is a compact and lightweight device that fits even in your pocket. The device is powered by a battery. If the batteries are about to run out, the device will warn you. It has an automatic switch-off function for energy-saving use. It has a built-in flashlight.

Main characteristics:

- True RMS measurements
- Measurement of voltage, current, resistance, frequency, capacity, duty cycle, temperature
- Functions: diode test, phase detection, non-contact voltage detection
- Digits and graphic scale on the screen, hold function
- Automatic switch-off, built-in flashlight, battery operation

The set includes:

- Digital multimeter
- Measuring probes
- Case
- User manual and warranty card

- Selection of the measurement limit value is automatic
- DC (direct current) voltage measurement limit 200 mV/2 V/20 V/200 V/1000 V: error ±(0.08%+5)
- AC (direct current) voltage measurement limit 200 mV/2 V/20 V/200 V/750 V: error ±(1.0%+25)
- DC current measurement limit value 200 µA/2000 µA/20 mA/200 mA: error ±(0.5%+5), 10 A: error ±(1.0%+15)
- AC current measurement limit value 200 µA/2000 µA/20 mA/200 mA: error ±(1.0%+25), 10 A: error ±(1.5%+25)
- Resistance measurement limit 200 Ω/2 kΩ/20 kΩ/200 kΩ/2 MΩ: error ±(1.0%+15), 20 MΩ/100 MΩ: error ±(3.0%+25)
- Capacitance measurement limit 20 nF/200 nF/2 µF/20 µF/200 µF/2 mF: error ±(4.0%+50)
- Frequency measurement limits 200 Hz/2 kHz/20 kHz/200 kHz/2 MHz/10 MHz: error ±(1.0%+10)
- Duty cycle measurement range 1–99%: error ±(3.0%+30)
- Diode test ✓
- Non-contact voltage detection (NCV detection) ✓
- True RMS ✓
- Hold function ✓
- Limit value function (Min/Max) ✓
- Phase detector (Live) ✓
- Overvoltage category cat. III (1000 V) IV (600 V)
- Screen LCD
- Display countdown 20000
- Display backlight ✓
- Graphic scale ✓
- Flashlight ✓
- Safety standards EN61010-1,-2-030; EN61010-2-033; EN61326-1
- Operating temperature range, °C −20... +1000 °C: error ±(1.0%+2)
- Continuity test ✓
- Power supply 2 AA batteries (not included in the set)
- Low battery indicator light ✓
- Automatic shutdown ✓