Jonsbo N4 is a cube-shaped Micro-ATX case for DIY NAS servers. The NAS housing has an elegant design, including an elegant decorative strip of dark walnut wood, which makes it even more attractive.

- Compact housing for black NAS systems
- Space for 2x 2.5 and 6x 3.5 inch drives
- Four low-profile expansion slots for up to 230 expansion cards
- Support for CPU coolers up to 70 mm high
- 1x USB-C and 1x USB-A on the front

Hardware capabilities
The Jonsbo N4 offers four half-height expansion slots and supports the installation of expansion cards such as RAID controllers, host bus adapters (HBAs) and network interface cards (NICs) up to 230 mm long.
The most important factor, however, is the storage capacity, as you can install up to six 3.5-inch hard drives and two 2.5-inch drives at once. They are easy to connect due to the already installed back plates.

Efficient cooling for continuous operation
The CPU cooler can be up to 70 mm high. The built-in 120 mm fan on the back ensures optimal cooling of the NAS hardware. The perforated front panel in front of the drive bay and additional perforations on the sides and top also help keep the NAS system properly cooled, ensuring a long lifespan.
There is a USB-C port with a speed of 10 Gbit/s and a USB-A port with a speed of 5 Gbit/s on the wooden cover.

- Dimensions: 286 x 228 x 300 mm (W x H x D)
- Material: steel, wood
- Weight: 3.75 kg
- Motherboard compatibility: ITX / Micro-ATX
- Fan slots: 1x 120 mm (built-in)
- Maximum length of graphics card: 230 mm
- Maximum CPU cooler height: 70 mm
- Maximum length of power supply unit: 125 mm

Drive installation locations
- 6x 3.5 inches
- 2x 2.5 inches
- Power supply: 1x SFX (optional)
- Expansion slots: 4 (low profile)

I/O panel
- 1x USB-C 3.1 (USB 3.2, Gen 2, 10 Gbps)
- 1x USB-A 3.0 (USB 3.2 Gen 1, 5 Gbps)