FIBARO Smart Implant controller module white FGBS-222

- Compatible with any certified Z-Wave or Z-Wave Plus controller
- Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG based encryption
- Works as a Z-Wave signal repeater
- Allows you to connect sensors: 6 DS18B20 sensors, 1 DHT sensor, 2 x 2-wire analog sensors, 2 x 3-wire analog sensors, 2 x binary sensors
- Built-in temperature sensor
- Z-Wave Plus
- Power supply: 9-30V DC ± 10%
- Inputs: two 0-10V or 1 input with 1 serial line
- Outputs: 2 potential-free outputs
- Supported digital sensors: 6 DS18B20 or 1 DHT22
- Maximum current at the outputs: 150mA
- Maximum voltage on the outputs: 30V DC / 20V AC ± 5%
- Built-in temperature sensor measuring range: -55°C to 126°C (-67°F to 259°F)
- Operating Temperature: 0-40°C (32-104°F)
- Radio protocol: Z-Wave (500 series chip)
- Radio frequency: 868.4 or 869.8 MHz EU; 908.4, 908.42 or 916.0 MHz; 921.4 or 919.8 MHz ANZ; 869.0 MHz RU
- Radio transmission power: max. 7dBm (EIRP)
- Range: up to 50m (164ft) outdoors, up to 40m (131ft) indoors (depending on terrain and building structure)
- Dimensions (L x W x H): 29 x 18 x 13 mm (1.14” x 0.71” x 0.51”)
- Compliance with EU directives: RoHS 2011/65 / EU, RED 2014/53 / EU