EA620 Rt is a reliable 2000 VA nominal uninterruptible power supply (UPS) that provides a real sinus wave output to safely operate sensitive electronic devices even in the event of a power failure. The microprocessor-controlled design and the USB communication interface allow the system to control and control the system through the enclosed Windows software.

The device is also equipped with overvoltage and telephone line protection (RJ45), so we can safely know not only power supply but also communication lines. The four C13 output sockets are capable of serving several tools.

The front control panel has on/off buttons and 4 LEDs, as well as an LCD display that displays the following data:

- from network during operation: Input and output voltage (Uin/Uout), battery charge %, output load %
- Battery mode: output frequency, output voltage, battery charge %, output load %

The built -in 3 12V / 9AH lead battery provides up to 30 minutes at 100 W loads, while full filling is approx. It takes 8 hours.

Passive -cooled UPS can be used quietly (below 25 pieces), IP20 protection and at 0-40 ° C with a relative humidity of 20-90%. An excellent choice for places that require reliable reserve flow and sophisticated protection.

Properties:
- Power: 2000 VA / 1600 W
- Input voltage: 230 V AC ± 25%
- Input frequency: 50 Hz ± 10%
- Output voltage: 230 V AC ± 10%
- Output frequency: 50 Hz ± 10%
- Output waveform: sinus
- Output connectors: 4 × IEC C13
- Communication interface: USB
- Survival protection: RJ45
- Battery: 3 × 12 V / 9 AH (closed lead-acid)
- Charging time: approx. 8 hours (up to 90%capacity)
- Operating time at 100 W load: approx. 30 minutes