Dreame Z1 is a pool robot that autonomously removes dirt from the bottom, walls and water line, ensuring cleanliness without your intervention. The device works wirelessly, which makes it easier to use and eliminates the problem of tangled cables. Efficient dual-motor operation and up to 8,000 gallons per hour of suction allow for efficient removal of sand, algae, hair, leaves and other common contaminants. A full charge of the battery is sufficient for up to 5 hours of continuous operation, so it is possible to thoroughly clean an area of ​​up to 180 m². The device can be operated using the buttons on the case or from the Dreamehome application.

Convenience without tangled cables
The Dreame Z1 pool robot works wirelessly and is equipped with a 9600 mAh lithium-ion battery. This means you don't have to worry about dragging wires around the garden. After a full charge, which takes 4-5 hours, the device works for 3-5 hours - depending on the conditions and cleaning method. So you can be sure that even a larger pool (both above ground and in-ground) will be thoroughly cleaned.

Intelligent navigation and obstacle detection
PoolSense™ technology and the Sensor Fusion module, which together support the sensors, are responsible for the spatial orientation of the robot. The Dreame Z1 can detect obstacles larger than 2 inches (about 5 cm) and avoid them while cleaning the pool. This ensures that the device moves smoothly and avoids collisions with fixtures that could interfere with its operation.

Effective dirt collection
The device is equipped with two brushless pump motors and brushes at the front and back. Maximum suction is approximately 8,000 gallons per hour (30 m³/h), which allows for effective removal of both fine debris and larger debris such as leaves, twigs, and hair. The collected dirt goes into a 4.5 liter tank.

You can choose from four modes
Choose from four modes such as Standard, Floor Only, Walls Only and Waterline Only to define the area to be cleaned. You can set the mode either directly on the device or through the Dreamehome mobile application, which also allows you to set the operating parameters.

Independent parking and easy management
When the work is finished, the Dreame Z1 robot automatically returns to its place near the edge of the pool, from where it can be easily pulled out using the attached hook. Easy-to-read LED displays inform you about the status, charge level and operating mode of the device.

Thoughtful, robust design
Dreame Z1 weighs 11.8 kg, so it works stably underwater without floating. At the same time, thanks to its compact dimensions (470.2 x 423.8 x 281.2 mm), it does not take up much space when stored and easily fits in a glove compartment.

Technical data
- Weight: 11.8 kg
- Battery: 9600 mAh
- Maximum working area: 180 m2
- Working hours: 3-5 hours
- Charging time: 4-5 hours

Package contents
- Dreame Z1 pool robot
- Magnetic charger
- Hook for lifting the device out of the water
- User manual