AXAGON HUE-S2BP 4-port USB 3.0 hub with 1.2 m long USB cable, power supply and fast charging support on all ports.

A light and small hub with an elegant, matte plastic case that quickly and easily connects up to four USB devices to your computer.

The fixed 1.2 meter USB cable is suitable for a desktop computer.

The power supply / charger with 5V/2A output type A USB and the 1.5 m long USB micro cable are included in the packaging. A big advantage of this solution is that the included charger and cable can be used universally, e.g. can be used for direct charging of mobile phones or tablets.

Mobile phones, tablets, external batteries and other devices can be charged at up to 2 amperes (depending on the charger) through any hub port, thanks to the USB Battery Charging 1.2 technology support.

It supports the charging of iPad tablets without additional power supply, at about 1 amp (it is mostly not possible to charge the iPad via a USB 3.0 port from a computer).

It can handle several external hard drives at the same time without any other power supply. When the external power supply is available, up to three external hard drives can be used simultaneously.

It can also be used as a separate charging hub, and the adapter can be used to charge USB devices even when the PC is not switched on or connected.

The USB ports are located on the entire surface of the hub, at a suitable distance from each other, so that they do not hinder the connection of larger USB devices.

Properties:
• 4 downstream USB 3.0 ports, with enough space around the connectors.
• An upstream USB 3.0 port with a USB 3.0 Type A male connector at the end of a 120 cm long cable.
• Compatible with USB 3.0 and backward compatible with USB 2.0 and 1.1.
• Supports the following transmission speeds: 1.5 / 12 / 480 / 5000 Mb/s (low / full / high / super speed).
• Supports USB Battery Charging v 1.2 specification.
• The power supply unit with 5V/2A output type A USB and the 1.5 m long charging & data USB micro cable are included in the packaging.
• Each hub port can be used for 2 amp charging (with connected external USB charger).
• Up to 2A iPad charging support (with external USB charger) or 1A (without external power supply).
• Possibility to connect the device thanks to the support of Hot Plug.
• Full Plug and Play support.
• LED display of the hub connector of the power connector.
• Overcharge detection and protection.
• Hub size: 96 x 32 x 22 mm, USB charger size including plug 22 x 36 x 76 mm.
• Hub weight: 76 g (including cable), USB charger weight 36 g (without USB cable).

Hub power supply method via USB cable (bus power supply):
• The power of the USB bus is sufficient to supply a device with low energy consumption (mouse, keyboard, card reader, flash disk, etc.) or with its own power supply (printer, scanner, 3.5" external disk) connected to the four ports.
• In this mode, the USB hub can handle up to two magnetic 2.5" external hard drives at the same time.
• In this mode, it is possible to charge mobile devices (e.g. iPads), however, the charging current is only 0.9 A, sometimes 1 A (depending on the computer).

The included USB charger's own hub power supply system (own power supply):
• In this mode, the USB hub can handle up to three magnetic 2.5" external hard drives at the same time. However, we recommend that max. Connect 2 external 2.5" drives simultaneously for reliable, long-term hub operation.
• Fast charging of portable devices (including iPads) up to 2 A in each hub port. The total current supplied by the hub during charging is limited by the output current of the external power supply.

Independent charging hub mode without connecting to the computer (charging hub):
After turning off the connected PC, or without being connected to the PC, the hub also functions as a USB charging station via a separate USB charger.
• Fast charging of portable devices (including iPads) up to 2 A in each hub port. The total current supplied by the hub during charging is limited by the output current of the external power supply.

OR support: • MS Windows XP / Vista / 7 / 8 / 8.1 / 10 or later, Windows Server 2003 / 2008 / 2012 or later (all 32-bit and 64-bit Windows systems are supported), Mac OS X 10.4x or later , Linux kernel 2.6.x or later.
Note: Drivers are found in operating systems and are installed completely automatically. There is no need to install other drivers and they are not available.

Contents of the package:
• USB 3.0 hub with fixed 120 cm cable
• universal power supply adapter / charger with 5V/2A output USB
• small type A USB universal power and data cable/ 150 cm long small micro USB
• packed in a cardboard box with clearly marked parameters and installation procedure