Metal USB 3.2 Gen 1 (USB 3.0) hub. AXAGON HUE-MSA can connect up to four USB devices to a laptop or computer. It also offers a USB port shutdown and charging center function.

The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant, fine surface against fingerprints. Rubber pads prevent them from sliding off the table. The permanently fixed 20 cm long USB cable is ideal for users of mobile devices.

All USB ports can be turned on/off with a button. This makes it easier to disconnect unnecessary devices without having to disconnect them from the USB hub. Each USB-A port has a blue LED to indicate whether the port is on or off. After connecting the hub, all LEDs are lit = ports are enabled, LED is off = port is disabled.

The versatility of the USB hub is also increased by the built-in micro USB connector, which supports standard USB charging for mobile phones. Thanks to this additional power supply, several external disks can be connected to a computer, laptop, tablet or smartphone. The USB 3.2 Gen 1 standard enables a transfer speed of 5Gb/s.

Thanks to the charging hub function, mobile devices can be charged without connecting to a computer. With an unused charger, this USB hub becomes a free charging center. The hub also charges phones and tablets operating at 1.5A/5V. So the hub can easily charge Android smartphone, Apple iPhone, Apple iPad and other devices.

The hub is an ideal accessory for ultrabooks with a small number of USB-A ports. It is also no problem for the hub to connect to phones with the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet.

Input:
• 1x USB 3.2 Gen 1 / SuperSpeed ​​USB port, USB-A male connector.
• Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.
• The USB-A male connector is 20 cm long and fixed to the cable.

Output:
• 4x SuperSpeed ​​USB ports, USB-A female connector.
• 4x On/Off buttons with LED indication.
• Supports the following transmission speeds 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed ​​/ High / Full / Low speed).
• The total throughput / transmission speed of the station depends on the USB 3.2 Gen 1 interface used (theoretically 5 Gbit/s).

Properties:
• Possibility to connect the device thanks to the support of Hot Plug.
• Full Plug and Play support.
• Support power saving mode.
• High-quality shielded cable ensures fast communication speed and minimizes unwanted noise.
• Its dimensions are 102 x 31 x 10 mm.
• Weight 39 g (including cable).
• 20 cm USB cable.

How to power the hub via a USB cable (bus power):
• The power supply of the USB bus is sufficient to connect a low-energy USB device (mouse, keyboard, card reader, flash drive, etc.) or devices with their own power source (printer, scanner, 3.5" external disk) to all four ports.
• In this power supply mode, the USB hub can operate with up to two magnetic 2.5" external disks at the same time.
• Charging mobile devices with a current of up to 1.5A (including the iPad) at each distribution port. The total charging current (which is divided into ports) reaches 2A at 5V (depending on the capabilities of the computer's USB port).

How to power the hub via USB + external USB charger (self-supply):
• Built-in micro USB connector for additional power supply to the hub.
• The wall charger of any mobile device with a micro USB connector (not included) can be used (the recommended output current of the charger is at least 2A).
• In this power supply mode, the USB hub can work with up to two magnetic 2.5" external disks at the same time. Recommended for connecting to smartphones and tablets.
• Charging mobile devices with a current of up to 1.5A (including the iPad) at each distribution port. The total charging current (which is divided into ports) reaches 2.6A at 5V (depending on the capabilities of the external wall charger).

Independent charging center mode without connecting to a computer (charging center):
• After the connected computer is turned off or without connecting to the computer, the hub works as a separate charging USB hub with power from the USB wall charger. Just connect a standard wall charger with a micro USB connector to the hub (micro USB input).
• Charge mobile devices with a current of up to 1.5A (including iPad) on each distribution port The total charging current (which is divided into ports) reaches 2.8A at 5V (depending on the capabilities of the external wall charger).

Supported operating systems:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 or later, Windows Server 2003 / 2008 / 2012 / 2016 or later (all 32-bit and 64-bit Windows systems are supported), Mac OS X 10.4.x or later , Linux with kernel 2.6.x or higher, most Android versions.
Note: