The thin USB-C 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-F7C easily and quickly connects up to seven USB devices to the computer at the same time with a 30 cm long USB cable. The USB 3.2 Gen 1 standard enables a transfer speed of 5Gb/s.

The metal hub body is made of aluminum and offers perfect mechanical protection. Elegant, fine surface against fingerprints. The fixed 30 cm long USB-C cable is ideal for mobile device users. The advantage is the separate USB-A port on the front, which will be needed to connect larger flash drives, readers and other USB devices.

The versatility of this USB hub is enhanced by the built-in micro-USB connector, which provides additional power to the standard USB charger that comes with mobile phones. Thanks to this additional power supply, several external disks can be connected to a computer, laptop, tablet or smartphone. It can handle the permanent connection of multiple external drives, even without the hub's external power supply. After connecting the external power supply, you can work with five external disks at the same time.

Thanks to the Charging hub function, mobile devices can be charged without connecting to a computer. An unused charger turns this USB hub into a free charging hub. The hub also charges phones and tablets operating at 1.5A/5V, so the hub can easily charge Android smartphones, Apple iPhones, Apple iPads, etc.

The hub is not afraid to connect to phones with a USB-C connector. You can connect a flash drive, reader, keyboard and mouse to your phone or tablet.

Input:

- Direct connection on 1x USB 3.2 Gen 1 / SuperSpeed ​​USB port USB-C male.
- Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.
- USB-C male connector, 30 cm long, fixed to the cable.

Outputs:

- 7x SuperSpeed ​​USB ports, USB-A female connector.
- Supports the following transmission speeds 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed ​​/ High / Full / Low speed).
- The total throughput / transmission speed of the station depends on the USB 3.2 Gen 1 interface used (theoretically 5 Gbit/s).

Properties:

- Possibility to connect the device thanks to the support of Hot Plug.
- Full Plug and Play support.
- Support power saving mode.
- The high-quality shielded cable ensures fast communication speed and minimizes unwanted noise.
- The blue LED indicates connection to the computer's USB port.
- Its dimensions are 145 x 42 x 15 mm.
- Weight 90 g (including cable).
- 30 cm USB cable.
- How to supply power to the hub via a USB cable (bus power):
- The USB power supply is sufficient to connect low-energy USB devices (mouse, keyboard, card reader, flash drive, etc.) or devices with independent power supply (printer, scanner, 3.5" external drive) to all four ports.
- In this power supply mode, the USB hub can work with up to 3 magnetic 2.5" external disks at the same time.
- Charge mobile devices (including iPad) with up to 1.5A current in each hub port. The total charging current (which is divided into ports) reaches 3A at 5V (depending on the capabilities of the computer's USB port).

How to power the hub via USB + external USB charger (self power):

- Built-in micro USB connector for additional power supply to the hub.
- The wall charger of any mobile device with a micro USB connector (not included) can be used (the recommended output current of the charger is at least 2A).
- In this power supply mode, the USB hub can operate with up to 5 magnetic 2.5" external disks at the same time. However, for the long-term reliable operation of the hub, we recommend connecting up to 3 magnetic external 2.5" drives at the same time.
- Charge mobile devices (including iPad) with up to 1.5A current in each hub port. The total charging current (which is divided into ports) reaches 5A at 5V (depending on the capabilities of the external wall charger).

Independent charging hub mode without connecting to a computer (charging hub):

- After turning off the connected computer or without connecting to the computer, the hub works as a stand-alone charging USB hub through the USB charger, just connect a standard charger with a micro USB connector to the hub (micro USB input).
- Charging mobile devices with a current of up to 1.5A (including the iPad) at each distribution port. The total charging current (which is divided into ports) reaches 3A at 5V (depending on the capabilities of the external wall charger).

Supported operating systems:

- MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32 and 64-bit Windows operating systems are supported), Mac OS X 10.4.x and higher, Linux 2.6.x and higher, all Android versions.
- Note: Drivers are found in operating systems and are installed completely automatically.