The metal USB 3.2 Gen 1 (USB 3.0) multi-port AXAGON HMA-CR3A hub lets you connect up to three USB devices to a laptop or computer and adds an SD / microSD card reader.

The body of the metal hub is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant, fine surface against fingerprints. Rubber pads prevent them from sliding off the table. The permanently fixed 20 cm long USB cable is ideal for users of mobile devices.

This compact multi-port hub handles the permanent connection of multiple external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed can be up to 5 Gb/s. The hub also charges 1.5A/5V phones and tablets. So the hub can easily charge Android smartphone, Apple iPhone, Apple iPad and other devices.

The card reader supports all current versions of SD and microSD cards, including SDXC and microSDXC capacities up to 2TB. The USB 3.2 Gen 1 interface provides a high data transfer rate. The card reader enables simultaneous handling of cards in both slots and direct copying between them.

The multi-port USB hub is an ideal accessory for ultrabooks, which are available with a small number of USB-A ports and without a network card. It is also no problem for the hub to connect to phones with the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet.

Input:
• 1x USB 3.2 Gen 1 / SuperSpeed ​​USB port, USB-A male connector.
• Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.
• The USB-A male connector is 20 cm long and fixed to the cable.

USB Output:
• 3x SuperSpeed ​​USB ports, USB-A female connector.
• Supports the following transmission speeds 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed ​​/ High / Full / Low speed).
• The total throughput / transmission speed of the station depends on the USB 3.2 Gen 1 interface used (theoretically 5 Gbit/s).
• The USB hub can handle the connection of several external drives at the same time.

Card reader - two slots, supports the following formats:
• slot Micro SD: microSD / microSDHC / microSDXC / TransFlash,
• slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, miniSD, microSD / microSDHC / microSDXC, with MMC Micro adapter.

The reader supports the following flash card specifications:
• SD 1.0/1.1 (SD - Secure Digital, max. 2GB).
• SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB).
• SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB).
• MMC is eMMC 3.x / 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit).
• SD 3.01 and SD Jukebox application support (CPRM function).
• Ultra High Speed ​​bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) support, speed up to 104 MB/s.
• ECC (Error Correction Code) hardware support function and CRC (Cyclic Redundancy Check) function.
• 2 LUN - in file managers, the reader appears as a single disk unit.
• FAT 12/16/32, NTFS, exFAT (FAT 64) file format support.

Additional data:
• Possibility to connect the device thanks to the support of Hot Plug.
• Full Plug and Play support.
• Support power saving mode.
• High-quality shielded cable ensures fast communication speed and minimizes unwanted noise.
• The white LED indicates connection to the computer's USB port.
• Power supply via USB bus (USB bus power supply).
• Dimensions 84 x 24 x 18 mm.
• Weight 42 g (including cable).
• 20 cm USB cable.

Power Supply / Charging:
• The USB power supply is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or devices with independent power supply (printer, scanner, 3.5" external drive) to all four ports.
• The USB hub can handle the connection of several external drives at the same time.
• Charge mobile devices (including iPad) with up to 1.5A current in each hub port. The total charging current (which is divided into ports) reaches 2.8A at 5V (depending on the capabilities of the computer's USB port).

Supported operating systems:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and above, Windows Server 2003 / 2008 / 2012 / 2016 and above (all 32 and 64-bit Windows operating systems are supported), Mac OS X 10.4.x and higher, Linux 2.6.x and higher, all Android versions.
• Note: The drivers are part of the supported operating systems and their installation is fully automatic. There is no need to install other drivers and they are not available.

Package contents:
• SuperSpeed ​​USB multi port hub with fixed 20 cm cable,
• printed installation manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA,
• equipped with an opening for hanging on a shop rack.