The Axagon CLR-M2XT is a passive aluminum heat sink prepared for efficient cooling of the higher power NVME M.2 SSD drives. The universal passive heat sink can be used for 22 x 80 mm M.2 SSDs. The enclosed heat conductive sheets allow the use of a heat sink for each single and two-sided M.2 SSD.

Thanks to the total height of 24 mm and the 20mm passive, the heat sink can be used in the opening over which the graphics card extends. Cross tape The aluminum passive ribs and the metal frame optimize the heat exception of the M.2 SSD drive, which can reduce the temperature of the drive by up to 30 ° C. This extends the life of the SSD disk and prevents the disk from slowing down, the so -called "Thermal Throttling".

The heat sink can be used not only with M.2 axagon adapters, but also with motherboard M.2 (NGFF) sockets, etc. Thanks to the large refrigerator and the metal frame, it effectively guides the heat on both sides of the M.2 SSD, maximizing the efficiency of cooling. Thanks to its high cooling efficiency, this heat sink is one of the most effective models in the Axagon brand.

Properties:

- Support for any capacity M.2 drive
- Support for one and two-sided M.2 SSDs
- Support for 22 x 80 mm M.2 SSDs
-Support for SATA (AHCI) and NVME (PCI-Express) M.2 SSDs
- ribbed aluminum radiator body
- The heat conductive sheets can be combined and used for SSDs of various heights with one- and two-sided design
- Dimensions 77.5 x 24 x 24 mm
- Weight 45 g

Packaging Contents:

- Passive heat sink
- metal frame
- 3 pieces of thermal conductors
- mounting kit and screwdriver
- instructions for use