The AXAGON ADSA-M2C DUAL NVMe CLONE MASTER DOCK SuperSpeed ​​USB-C 10 Gbps docking station quickly and easily connects up to two NVMe (PCI-Express) M.2 SSD disks to the computer. Thanks to the convenient connection, a reversible USB-C connection is also possible. In the box you will find two cables to connect the dock – a basic USB-C -> USB-A cable and a USB-C -> USB-C cable.

This little utility offers the easiest and fastest way to connect up to two NVMe M.2 SSDs to your computer. Just grab the M.2 card and insert it into the motherboard, no tools or accessories required. Replacing M.2 SSDs is very quick and easy.

With the help of the docking station, you can easily clone the contents of the connected NVMe disks without having to connect it to the computer. Insert the source M.2 disk into the first slot (source) of the drive and the destination M.2 disk into the second slot (destination). After that, all you have to do is press the cloning button and watch the cloning process on the scale visible from the four LEDs. After copying all the data, the target disk will have an exact copy of the original M.2 disk. The dock can thus be used as an independent device for convenient copying and creating disc images. This is the easiest way to transfer the contents of one SSD to another SSD, including a working operating system (Windows, macOS, Linux...).

The fast USB 3.2 Gen 2 interface and support for NVMe Express with support for the UASP function allow you to enjoy the speed of modern NVMe M.2 SSD disks. TRIM support to reduce the gradual degradation of SSD performance over time. The S.M.A.R.T. the external hard drive can be monitored by reading information.

Aluminum body with a modern, minimalist design. Low center of gravity of the docking station for good stability. Rubber anti-slip pads prevent sliding on the table.

Input:
- USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed ​​USB 10 Gbps, up to 10 Gbit/s.
- Connect via USB type C female connection.

Aid:
- NVMe (PCI-Express) M.2 SSD drives, single-sided and double-sided,
- No capacity limitation,
- Supports M.2 drives with the following sizes 2230, 2242, 2260, 2280, 22110 mm,
- Supports M-KEY & B+M-KEY NVMe M.2 SSD drives,
- NGFF 75-pin B-key slot for NVMe M.2 disks.

Disk cloning function:
- Cloning takes place without connecting the station to a computer.
- The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started.
- SSD cloning speed up to 1000 MB/s.
- The total disk cloning time depends on the capacity of the source disk and not the amount of disk data.

Additional features:
- Compatible with USB 3.2 Gen 2 connector, backwards compatible with USB 3.1 Gen 1 (USB 3.0) and USB 2.0.
- Supports the following transmission speeds 10,000 / 5,000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed ​​/HighSpeed).
- Complies with PCI Express Base Specification Revision 3.1a specification.
- Complies with NVM Express 1.3 Specification.
- Meets the USB Mass Storage Class specification.
- The total throughput / transmission speed of the station depends on the USB 3.2 Gen 2 interface used (theoretically 10 Gbit/s).
- The bandwidth / data transfer speed of the box is around 1000 MB/s (1 GB/s), due to the limitations of the USB 3.2 Gen 2 connector.
- UASP (USB Attached SCSI) support in Windows 8 and newer versions for faster data transfer.
- Support for the TRIM function that prevents the gradual degradation of SSD performance over time.
- SSD boot support.
- Full Plug and Play support.
- Connection with USB 3.2 Gen 2 type C female connector.
- USB-C male / USB-C male 25 cm long cable in the package.
- USB-C male / USB-A male 25 cm long cable in the package.
- Aluminum body with built-in weights for better stability and anti-slip rubber pads to prevent sliding on the table.
- Station dimensions 68 x 68 x 17 mm.
- Weight 94 g.

Power supply:
- Power supply using a compact external AC/DC adapter 5V - 3A, with a 150 cm long power cable.
- Power switch.

LED indication:
- 2x white LEDs for each disk, indicating disk connection (steady light) and data transfer (flashing).
- 4x blue LEDs indicate the cloning process 25%-50%-75%-100% (flashing) and the end of cloning (constant light).

Supported operating systems:
- MS Windows 7 / 8.1 / 10 / 11 and above, Windows Server 2008 / 2012 / 2016 / 2019 and above (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and above, with Linux kernel 2.6 .x and higher.
Note: Drivers are usually included with a supported operating system. When using Windows 7, the operating system support and driver availability should be checked with the manufacturer of the M.2 SSD drive.

Contents of the package:
- NVMe dock,
- Power supply 100-240V / 5V-3A,
- USB-C USB-A 25 cm cable,
- USB-C USB-C