Axagon ADSA-D25 CLONE Mini Superspeed USB 5GBPS Dock/Clone Station Easily and quickly connect up to two 2.5 "discs at the same time .

With this compact aid, you can easily connect any 2.5 "SATA disc to a computer or laptop. One or two discs can be loaded at the same time, no tools or accessories are needed. Replacing the discs is very fast and easy.

The docking station allows you to easily clone the contents of the connected disks without having to connect to a computer. Insert the source plate into the first opening of the HDD (source) and insert the target plate into the second opening of the HDD B (target). Then just press the Cloning button and check the cloning process on four LED scales. After copying all the data, the exact copy of the original disk is on the target plate. Thus, the dock can be used as a standalone tool for convenient reproduction and recording. This is the easiest way to transfer the contents of an old hard drive to a new SSD, such as Windows, MacOS, Linux).

The SATA 6G interface with UASP support allows you to enjoy the speed of modern SSDs. TRIM support to reduce SSD performance over time. The station allows you to read SMART information, taking into account the status of the SSD / HDD. Supports stopped HDD/SSD stops.

The dock is a sufficiently robust and durable, which allows for perfect stability with inserted plates. Rubber legs reduce sliding on the table and hard disk vibration. The outer casing is made of aluminum with an elegant brushed surface.

Input:
- USB 3.2 Gen 1 (Superspeed USB 5 Gbps).
- Speed ​​up to 5 Gbit/s.
- Connect through USB Micro-B nuts.

Asset support:
- SATA III interface - 6GB/s (600 MB/s).
- 2.5 "SSD / HDD support.
- Max. Disk capacity - without any restrictions.
- Max 2.5 "height - all without restriction.

Features:
- Compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backwards compatible with USB 2.0.
- SuperSpeed/HighSpeed ​​support for 5000/480 Mbit/s.
- Suitable for Serial ATA 3.0 specification (SATA / 600), the transfer rate is up to 6 GB / s (600 MB / s).
- corresponds to Serial ata 2.0 specifications (SATA / 300), the transfer rate is up to 3 GB / s (300 MB / s).
- corresponds to Serial Ata 1.0 specifications (SATA / 150), the transfer rate is up to 1.5 GB / s (150 MB / s).
- Match the specifications for USB Mass Storage Class.
- The total transmission/transmission speed of the station is specified by the USB interface (theoretical 5GBit/s).
- Bot (mass transport only).
- USB Attached SCSI Protocol (UASP) Support for Faster data transfer in Windows 8 and higher.
- TRIM support to reduce SSD performance over time.
- Supports the SMART (self -supervision, analysis and reporting technology) system that monitors the condition of the disk.
- Support for starting from SSD/HDD at the docking station.
- Possibility to connect devices on the fly thanks to Hot Plug support.
- Full plug and play support.
- Automatically stop HDD - stops discs at idle.
- HDD Turn Off - turn off the disc after removing the device or hibernating your computer.
- Connect through USB 3.2 Gen 1 micro-B nut connector.
-60 cm USB Micro-B USB-A cable supplied.
- LED, which indicates the power supply of the SSD/HDD dock and the plateactivity in both sockets.
- The size of the station is 89 x 58 x 59 mm.
- Weight 137 g

Power:
- Power cable USB-A 3.5 / 1.3 mm DC 5V length 1 m The package. The cable allows you to power the station from a computer's USB-A port or a standard mobile phone charger with a USB-A output of 5 V / min. 1a, eg. Axagon ACU-DS16.
- Network switch.

Disk content cloning features:
- The cloning is done without connecting the station to the computer.
- The target plate must be of the same or higher capacity as the source plate, otherwise the cloning cannot be triggered.
-HDDs and SSDs can be clone.
- SSD cloning speed up to 300 MB/s.
- The entire disk clone depends on the source plate capacity, not on the amount of data on the disk.

Supported operating systems:
- MS Windows 7/8/10/11 and later, Windows Server 2008/2012/2016/2019/2022 and higher (supported by all 32 and 64 -bit versions of Windows), Mac OS X 10.x and newer Linux 2.6. x with kernel or newer.
- Note: The drivers are part of supported operating systems and are completely automatically installed. Other drivers do not need to be installed or available.

Package contents:
- SSD / HDD dock,
-USB Micro-B USB-A