The Axagon ADSA-CC Clone Master 2 Universal USB-C 10GBPS adapter can quickly and easily connect up to two drives to your computer. You can easily connect any 2.5 "or 3.5" drive directly to the adapter's external SATA connector. Simply insert the NVME M.2 drive into the adapter body without screwdriver or other tools. You can also connect the SATA M.2 drive to the adapter with an external adapter, such as the Axagon RSS-M2SD.

In the package you will find a USB-C USB-C cable with a fixed USB-C-> USB-A reduction. This solution increases the versatility of the adapter so you can connect it to any USB port on your computer, whether it is a two-sided USB-C connector or a conventional USB-A connector.

Thanks to a cloning function without connecting to a computer, the adapter can be used as a standalone device for convenient copying and taking a disk image. The direction of cloning can be adjusted with a switch so you can easily choose whether or not to clone the contents of a NVME M.2 drive on the SATA drive or vice versa. Once all the data is copied, the target plate has an exact copy of the original disk. This is the easiest way to move one drive to another drive, including a working operating system (Windows, MacOS, Linux ...).

In addition to the fast, 10GBPS USB connector, the adapter supports all important features for smooth work with different types of drives, such as UASP for faster data transfer, TRIM to limit the gradual deterioration of SSD over time, S.M.A.T. To monitor the status of the drives, boot from the adapter -connected drives, auto spindown to put drives in automatic sleep mode for longer inactivity, turn off off the drives after removing the device or putting the computer to sleep mode, and a USB Bus Power on Adapter, Of course, when connected to the USB port only, the connected M.2 and 2.5 "drives are required for the 3.5" drive.

These features make the Clone Master 2 adapter a very practical and useful tool for working with different types of drives. Thus, it is an ideal tool for backup, migration, data transfer and storage, testing and cloning of discs, etc.

Input:
- USB 10GBPS (USB 3.2 Gen 2).
- Up to 10 Gbit/s.
- USB-C reversible mother connector.

M.2-Connector Tool Support:
- Single and double-sided NVME (PCI-Express) M.2 SSD drives.
- Supported M.2 drives with the following dimensions 2242, 2260, 2280 mm.
-Supported M-Key & B+M-Key NVME M.2 SSD drives.
- Without restricting disk capacity.

Support for the SATA portal devices:
- SATA 2.5 "/3.5" SSD/HDD.
- SATA M.2 SSD M.2 Reduction -> SATA eg. Axagon RSS-M2SD.
- Without restricting disk capacity.

Disk clone function:
- The cloning is done without connecting the station to the computer.
- The target plate must be the same or greater capacity as the source plate, otherwise the cloning cannot be started.
- cloning change - NVME M.2 from drive to SATA drive or SATA drive to NVME M.2 drive.
- SSD cloning speed up to 500 MB/s.
- The total disk cloning time depends on the capacity of the source plate and not on the amount of disk data.

Further features:
- Compatible with USB 10 Gbps (USB 3.2 Gen 2).
- Return compatible USB 5GBPS (3.2 Gen 1 / USB 3.0) is USB 480Mbps (USB 2.0).
- Supports the following transmission speeds 10,000 / 5000 /480 Mbit / s.
- Complies with the PCI Express Base Specification Revision 3.1A specification.
- Suitable: NVM Express 1.3C Specification.
- The total permeability / transmission rate of the adapter is a function of the USB 3.2 Gen 2 interface (theoretically 10 Gbit / s).
- The total permeability / transmission rate of the adapter is a function of the USB 3.2 Gen 2 interface (10 GB / s).
- corresponds to the Serial ATA 3.0 specification (SATA/600) at up to 6 GB/s (600 MB/s).
- corresponds to the Serial ATA 2.0 specification (SATA/300) at up to 3 GB/s (300 MB/s).
- corresponds to the Serial ATA 1.0 specification (SATA/150) at up to 1.5 GB/s (150 MB/s).
- Complies with the USB Mass Storage Class specification.
- UASP (USB Attached SCSI) Support for Faster data transfer in Windows 8.1 and newer versions.
- Support TRIM function before gradual time degradation of SSD.
- S.M.A.R.T. (Self-monitoring, analysis, and reporting technology).
- Support for launching from discs connected to the adapter.
- HDD Auto Spindown - Automatically shut down the hard disk after a 10 -minute inactivity.
- HDD TURN OFF -