A compact AXAGON ADSA-1S6 SLIMport6 ​​high-speed adapter with USB 3.0 and SATA 6G interface for easy connection of an SSD or 2.5" SATA hard drive.

A handy tool to easily connect an SSD or laptop drive, including boot support.

UASP support significantly increases the data transfer speed, especially for smaller files arranged in a queue.

The TRIM option limits the gradual degradation of SSD performance.

The S.M.A.R.T. the connected hard drives can be monitored by reading information. It also supports shutdown of attached disks and adapter.

Even a layman can handle its use. The hard drive is connected to the adapter, which in turn is connected to the computer's USB port; the rest is done automatically.

The minimal size and weight, as well as the closed disc case, make this product portable.

Properties:
- Fully compatible with USB 3.0 and backward compatible with USB 2.0.
- Supports the following transmission speeds: 12/480/5000 Mb/s (full / high / super speed).
- Supports 2.5 inch SATA III / II / I hard drives regardless of capacity.
- Meets the Serial ATA 3.1 specification (SATA/600) with a transfer speed of up to 6 Gb/s.
- Meets the Serial ATA 2.0 specification (SATA/300) with a transfer speed of up to 3 Gb/s (300 MB/s).
- Meets the Serial ATA 1.0 specification (SATA/150) with a transfer speed of up to 1.5 Gb/s (150 MB/s).
- The total bandwidth / transmission speed of the case is determined by the USB 3.0 interface used (theoretically 5 Gbit/s).
- Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport) technology.
- Supports booting from SSD / HDD hard drives connected with a USB adapter.
- HDD Automatic shutdown - automatic shutdown of the hard drive after 22 minutes of inactivity.
- HDD stop - Stops the disk after removing the device or shutting down the PC.
- Possibility to connect the device thanks to the support of Hot Plug.
- Full Plug and Play support.
- Connection with USB micro B female connector.
- USB 3.0 cable USB 3.0 Type A male / USB 3.0 Type B male, 10 cm long.
- The power supply via the USB 3.0 bus is sufficient up to 900mA for each USB port.
- Blue LED that indicates connection to the computer's USB port (steady light) and data transfer (blinking).
- Compact adapter size: 70 x 21 x 10 mm.
- The weight of the adapter is only 11 g, the weight of the USB cable is 18 g.
- Simple plastic case for 2.5" hard drive max. With a height of 9.5 mm, connected with a USB adapter (the USB cable can be routed through the hole on the case).
- Thin 7 mm SSD / HDD foam plates are included in the case for a better fit.
- The case is also good for transporting the adapter, without the hard drive, with the USB cable.
- Case dimensions: 122 x 78 x 19 mm.
- Case weight: 40 g.

Supported operating systems:
- MS Windows XP / Vista / 7 / 8 / 8.1 / 10 or later, Windows Server 2003 / 2008 / 2012 / 2016 or later (all 32-bit and 64-bit Windows systems are supported), Mac OS X 10.x or later , Linux with kernel 2.6.x or higher.
- Note: Drivers are found in operating systems and are installed completely automatically. There is no need to install other drivers and they are not available.

Contents of the package:
- USB 3.0 - SATA 6G adapter,
- USB 3.0 10 cm cable,
- plastic case for 2.5" hard drive and USB adapter,
- Foam discs for 7 mm hard drives and SSDs,
- Installation guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,
- Packed in a cardboard box.