Compact AXAGON ADSA-1S SLIMport3 adapter with USB 2.0 connector for easy connection to a 2.5" SATA drive.

A handy tool to easily connect a laptop's drive, including boot support.

The S.M.A.R.T. the connected hard drives can be monitored by reading information. Supports shutdown of connected hard drives.

Even a layman can handle its use. The hard drive is connected to the adapter, which in turn is connected to the computer's USB port; the rest is done automatically.

The minimal size and weight, as well as the closed disc case, make this product portable.

Properties:
- Fully compatible with USB 2.0 and backwards compatible with USB 1.1.
- Supports the following transmission speeds: 12 / 480 Mbit/s (full / high speed).
- Supports 2.5 inch SATA III / II / I hard drives regardless of capacity.
- Meets the Serial ATA 2.0 specification (SATA/300) with a transfer speed of up to 3 Gb/s (300 MB/s).
- Meets the Serial ATA 1.0 specification (SATA/150) with a transfer speed of up to 1.5 Gb/s (150 MB/s).
- The total bandwidth / transmission speed of the case is determined by the USB 2.0 interface used (theoretically 480 Mbit/s).
- Supports booting from SSD / HDD hard drives connected with a USB adapter.
- HDD automatic shutdown support - option for the duration of the hard disk shutdown in case of inactivity,
- HDD Automatic shutdown - the hard drive turns off after the computer shuts down.
- Possibility to connect the device thanks to the support of Hot Plug.
- Full Plug and Play support.
- Direct connection with USB Type A male connector on a 20 cm long cable attached to the adapter.
- Power supply with USB bus mode.
- Blue LED that indicates connection to the computer's USB port (steady light) and data transfer (blinking).
- Compact adapter size: 70 x 21 x 11 mm.
- The weight of the adapter is only 17 g, including the 20 cm USB cable.
- Simple plastic case for 2.5" hard drive max. With a height of 9.5 mm, connected with a USB adapter (the USB cable can be routed through the hole on the case).
- Thin 7 mm SSD / HDD foam plates are included in the case for a better fit.
- The case is also good for transporting the adapter, without the hard drive, with the USB cable.
- Case dimensions: 122 x 78 x 19 mm.
- Case weight: 40 g.

Supported operating systems:
- MS Windows XP / Vista / 7 / 8 / 8.1 / 10 or later, Windows Server 2003 / 2008 / 2012 / 2016 or later (all 32-bit and 64-bit Windows systems are supported), Mac OS X 10.x or later , with Linux kernel 2.6.x or higher.
- Note: Drivers are found in operating systems and are installed completely automatically. There is no need to install other drivers and they are not available.

Contents of the package:
- USB - SATA adapter with fixed 20 cm long cable,
- Plastic case for 2.5" hard drive and USB adapter,
- Foam discs for 7 mm hard drives and SSDs,
- installation guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,
- packed in a cardboard box.