Enjoy full surround sound on any computer thanks to the AXAGON SOUNDbox external USB sound card!

The 8-channel ADA-71 USB audio adapter allows you to connect 7.1 or 5.1 surround sound, 4.0 channel speakers or 2.1 and 2.0 stereo speakers.

An extremely rich device with many options - it does not lack an audio input or output.

The standard 3.5 mm headphone output is supplemented by a non-standard second headphone output with a 6.3 mm jack. You don't need to search for a suitable converter.

Four analog outputs can complement the two types of digital S/PDIF outputs: optical Toslink and coaxial RCA connectors for connecting up to eight speakers. Connecting to an amplifier should not be a problem with this sound card.

You can also enjoy AC3 pass-through support.

The two 3.5 mm inputs allow the connection of a stereo microphone.

Another analog input enables analog signal recording.

Finally, there are two types of digital S/PDIF inputs: optical Toslink and coaxial RCA connector for digital signal recording.

The AXAGON ADA-71 SOUNDbox external 7.1 USB sound card equips the computer with surround sound and a number of audio inputs and outputs.

Allows you to connect 7.1, 5.1, 4.0, 2.1 or 2.0 stereo speakers, headphones or a microphone to the machine.

It also includes an analogue, digital optical and coax input so you can record audio from external sources such as musical instruments or DVD players. A digital optical or coax output allows you to connect an amplifier.

With the sophisticated Xear 3D software, you can fine-tune the surround sound effects, equalizer, or karaoke effects.

Outputs:
- 2-channel analog 16-bit headphone output (1 x 6.3 mm stereo jack and 1 x 3.5 mm stereo jack)
- One digital S/PDIF optical output with Toslink connector and one digital S/PDIF coaxial output with RCA connector for connecting the adapter to the amplifier, with AC3 pass-through support

8-channel analog 16-bit output (4 x 3.5 mm stereo jack):
1. Center / subwoofer output,
2. Left / right speaker output,
3. Left / right speaker output, stereo output for speakers in 2-channel configuration,
4. Left / right rear speaker output.

Sampling rate, resolution and output converter (DAC) noise:
- Analog - 44.1 / 48 kHz @ 16 bit for playback,
- Signal-to-noise ratio (SNR output) ≥ 96 dB,
- Harmonic distortion (THD + N output) ≤ -88dB / ≤ 0.0056 % (20 Hz ~ 20 kHz).

Inputs:
- Stereo microphone with 16-bit input (2 x 3.5 mm mono jack)
- 2-channel analog 16-bit input (3.5 mm stereo jack) for analog signal recording
- One digital S/PDIF optical input with Toslink connector and one digital S/PDIF coaxial input with RCA connector for digital signal recording

Sampling rate, resolution and input converter (ADC) noise:
- Analog - 44.1 / 48 kHz @ 16 bit for recording,
- Signal-to-noise ratio (SNR input) ≥ 88 dB,
- Harmonic distortion (THD + N input) ≤ -82dB / ≤ 0.008 % (20 Hz ~ 20 kHz).

Button and Indicators:
- MUTE button to mute the microphone,
- LED indication of the microphone off state,
- MUTE button to mute system sounds,
- two buttons to control the volume of system sounds,
- LED that indicates connection to the computer's USB port (steady light) and data transfer (blinking).

Other features:
- USB 2.0 full speed 12 Mbit/s and USB 1.1 compatible interface.
- Connection with USB 2.0 mini B female connector.
- USB 2.0 Type A male / USB mini B male cable, 1 m long.
- Parallel, full-duplex recording and playback.
- Easy to install thanks to full Plug and Play support.
- Possibility to connect the device thanks to the support of Hot Plug.
- Supports SCMS (Serial Copy Management System) technology.
- Meets the IEC60958 specification.
- Dolby digital audio streaming with digital S/PDIF output.
- Adapter power supply via USB (bus) - no additional power supply required.
- Size: 142 x 92.5 x 28.5 mm.
- Weight: 158 g (without USB cable).
- The CMedia CM6206 chipset is installed.

Xear 3D software allows you to:
- Equalizer setting (10-band equalizer, 12 schemes),
- Adjusting the recording and playback volume (the volume of each speaker can be adjusted from +12 to 96),
- Adjusting the shift of the speakers (Speaker Shifter),
- Selecting the type and size of the sound environment (27 effects - concert hall, music club, room... 3 room sizes),
- Karaoke effect settings (echo, pitch change, vocal removal),
- Two-speaker surround sound setup.

Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 or later, Windows Server 2008 / 2012 / 2016 or later (all 32-bit and 64-bit Windows systems are supported).

Note: Basic drivers in operating systems