Main use:

Line-interconative UPSs are the most common uninterruptible power supplies for smaller businesses, protecting web servers and corporate departments. The equation/alternating current is converter, that is, the inverter is constantly linked to the output. The inverter is operated in reverse mode, the battery is charged from network supply. When the incoming power is eliminated, the switch opens and the UPS output is electricity from the battery. Because the inverter is continuously operating and is related to the rescue, these systems compared to standby UPSs are better filtering and work with shorter switching transients. In addition to this, line interactive units usually also contain a voltage control transformer. Depending on the changes in the input voltage, this provides additional voltage control by adjusting the transformer taps. Voltage control under low voltage conditions is an important function, and, in the absence of UPS, it should switch to battery power and then turn off consumers in the long run. The more frequent battery use leads to premature batteries. The advantage of such uninterruptible power supplies is high efficiency, small size, low cost and high reliability. LCD Display: Alphanumeric display that displays system parameters and alarms.
USB Connection: Provides UPS monitoring through a USB port.
Automatic Voltage Control (AVR): Low voltage automatically increases the high voltage and reduces the tall, thus ensuring a constant voltage level.
BOOST and TRIM Automatic Voltage Control (AVR): Provides greater availability for applications by correcting too low or too high voltages without using a battery.
Unattended shutdown: This guarantees the backup of the files and the proper shutdown of the operating system in the event of a protracted power outage. Ethernet Protection: Protects the hardware against failure. Supplemental Outputs Protected Outputs: Deaginal Solo Slot Supplies Protecting On Only Transitional Surge Voltage Protects non -sensitive equipment such as scanners and printers, without reducing the power of the unit or the battery capacity. This allows us to ensure the maximum battery power of the devices that are most needed, such as the computer and the monitor. On -site cable error indicator: Immediately warns of cabling problems such as inadequate grounding that can cause short circuits or prevents UPS from properly controlling the current. (Only with 120V units)

Main qualities:

- Nominal power: 1500 va
- design: tower
- Topology: Line-Interactive
- Acoustic noise: 45 dba
- Width: 112 mm
- Height: 301 mm
- Depth: 382 mm
- Mass: 13 kg
- Connectors: 6x Schuko CEE 7
-Data line protection: RJ-45, RJ-11