The Ancel S3000 is a leak detector that allows the effective diagnosis of many vehicle systems with smoke or compressed air. The compact design has a pressure gauge, flowometer, independent mode control and a number of security features. The device is designed for evap, turbo, EGR, suction, fuel, refrigerator, exhaust and vacuum systems. It also supports the study of EGR systems and vacuum leaks. Its power, easy -to -use and versatility make it an instant used tool in any workshop.

2 mode of operation

The Ancel S3000 offers a diagnostic leak search 2 modes - air and smoke activated by separate buttons. With the separate buttons that activate the air pump and the smoke generator, you can trigger the test exactly according to the needs of the system - without changing configuration or separating parts.

Visible test effect

The Ancel S3000 smoke generator produces dense and stable smoke, which makes leakage effectively visible - even the smaller ones. The test process begins after an enema of 20 ml of test oil, which allows a quick and accurate diagnosis without disassembling the system. This saves time and avoids the wrong replacement of working parts. The smoke leaves through the separate output opening on the side of the house, so it can be easily controlled to a particular location.

Accurate control of parameters

There is a pressure gauge expressed in PSI units and a flow meter (LPM) and a flow control button on the front of the device. This allows you to fully check the pressure and quantity of smoke entering the system. These indications also serve to estimate the degree of leak - from the smaller to the massive. The pressure indicator allows quick detection of droplets clearly indicating the leaks.

Flow control

A built -in flow meter with an easy -to -read scale per minute per minute allows the strength of the smoke to flow into the system. Low flow rate increases the visibility of smoke for smaller leaks, while the high flow rate allows for the rapid filling of larger tube spaces. The constant flow rate is also a test method - the stable level indicates leaks, while the decrease indicates the degree of leakage.

Compact but lasting design

The 185 × 130 × 85 mm metal housing resists mechanical injuries. The device is equipped with a hook and velcro fastening strap, which facilitates the work in narrow service rooms and under the hood of the vehicle. In addition, there is a built -in oil level indicator on the house, which allows you to quickly check the amount of test fluid before starting work. Heat protection allows safe operation in a wide temperature range. Overheating protection is automatically activated if the temperature exceeds 75 ° C and the antifreeze system allows normal operation at -20 ° C. The system automatically stops the device when the temperature is too high, preventing the internal parts from damage.

A simple interpretation of results

The signaling system allows you to evaluate the size of the leak - no leaks, small leaks or high leaks. The easy -to -read scales on the discs allow you to quickly analyze the condition of the system without additional measuring tools. Both the flow meter and the pressure gauge act as a diagnostic display, which can be observed in real time.

- Model S3000
- Dimensions 185 × 130 × 85 mm
- flow capacity