Radio channel controller for remote control of low current equipment. It is used to activate electric locks, gates and swing gates, rolling shutters and curtains, and to reset modems and routers.

The device uses a relay to control the power supply, which closes and opens the dry contact.

It works from 7 V ~ 24 V DC voltage sources. The dry contact is not galvanically connected to the device.

Installation and Setup
The device is installed in junction boxes, distribution boards and enclosures of switch units.

Specifications
- Classification: Radio channel relay unit
- Device type: Wireless
- Installation method: Electrical switchboard, junction box
- Compatibility: Only works with Hub and Hub Plus
- Operating element: Electromagnetic relay
- Relay lifetime: 200,000 activations
- Voltage protection: Max: 36.5 V, min: 6.5 V
- Maximum load current: 36 V DC for 5 A, 230 V AC for 13 A
- Maximum current protection: None
- Maximum temperature protection: 65°C at the place of installation
- Electric consumption meter function: None
- Energy consumption parameter check: Voltage
- Alarm signal delivery time: 0.15 s
- Power supply: 7V ~ 24V (DC only)
- Communication range with central unit: up to 1000 m in open space
- Two-way communication between devices
- Operating frequencies: 868.0 MHz ~ 868.6 MHz
- Self-tuning RF output power: up to 25 mW
- Block encryption based on the AES algorithm
- Scanning time of the device: 12 s ~ 300 s
- Operating temperature: 0°С ~ 64°С
- Humidity: up to 75%
- Protection class: IP20
- Tamper resistance: Fraud protection, Jam detection
- Remote setup and testing
- Size: 39 x 33 x 18 mm
- Weight: 32 g