WYBOT Winny 200 cable without pool cleaning robot

Wybot Winny 200 wireless pool cleaning robot

The Wybot Winny 200 is a wireless robot designed for the automatic cleaning of above-ground pools up to 60 m². Its outstanding feature is a maximum operating time of approximately 80 minutes and a filtration capacity of 7.5 m³/h. Powered by a 3200 mAh battery, the robot does not need cables, which increases convenience and safety. Due to its compact design and weight of 3.3 kg, the robot is easy to carry, and its IPX8 waterproof rating ensures problem-free operation up to 2.5 m of immersion.

Effective cleaning and increased suction power

The robot is equipped with an improved suction system with a power of up to 30 W, which efficiently collects sand, leaves and small debris. The design prevents the debris from seeping back, so the dirt that is sucked up stays in the device and cannot get back into the water. In addition, the Winny 200 efficiently covers the entire area to be cleaned at a speed of approximately 16 m/min.

Two-stage filter system

The Winny 200 uses a two-stage filter system consisting of a foam filter and a 180 µm density tray. This combination effectively captures both larger debris and fine particles. The filter is easy to remove and clean - simply rinse with water.

Intelligent parking at the edge of the pool

Smart sensor technology means that when the battery runs low, the robot automatically moves to the pool wall and stops near it. This, combined with the included hook, makes it easy to remove the device from the water.

Wireless comfort and easy handling

Handling the robot has become as simple as possible - just press the button and immerse the device in water to start cleaning automatically. In addition, thanks to the wireless design, there is no need for cables and no range limitations. Sit back and watch the Winny 200 do the cleaning!

Lightweight design, long operating time and fast charging

The low weight and built-in handle make the robot easy to carry, and the operating time of about 80 minutes is enough to thoroughly clean even a large, 60 m² pool. The robot charges in about 4 hours, and the built-in LED indicator light indicates the charging status.

Contents of the set

Cleaning robot
Filter basket (foam + 180 µm filter)
Handle and grip
Scraper x2
Hook for removing the robot from the water
Screws
Charger
Instructions for use