Rigid structure

RMA has a robust welded structure. High quality design and the latest technologies provide perfect appearance of the closet. Vlasins are new, wider and made of 1.3 mm thick.

Flexible door opening

The hinge system allows the door to open the door at 165 °. The door is easy to remove and reclaim to change the direction of the opening. The double -winged doors are equipped with mounted hinges.

Glass

Metal doors with glued glass are made of 4 mm thick hardened safety glass, which is resistant to frequent blows. It forms a number of small fragments like the automotive glass when breaking. For safety reasons, we recommend that you close the door after installing the unit in the cabinet to avoid collision with other objects. The used bottle was tested in a certified test laboratory and complies with the requirements of the ČSN EN 12150-1+A: Structural Glass-The thermally trained sodium-mesh silicate requirements. The tested glass corresponds to the standard for breakfast after the glass fracture, CQ-24-2023 Certificate of conformity, IKATES 58A-2024.

Triton

For free -standing cabinets, we make self -made handles. By replacing the plastic module (not included), a semi -cylinder lock insert can be installed. Patent: PUV 2013-27443

Adjustable vertical rails

Vertical 19 ”rails are freely adjusted at any depth of the cabinet. This simplifies the installation of the device and the configuration of the cables.

Removable side panels and back cover

RMA has a welded frame and removable side panels. These are fixed to the frame with a lock that has the same key as the door and the back.

Door for fan units

For this wardrobe type, you can order a special metal door ready to install the RAX-CH-X0X-X3 fan units. For more information, see Active Cooling.

Blanket

The cable inlet openings are covered with outbreak types of cover panels. To prevent the dust from penetration, the cables can be sealed in the opening or simply secured using a protective rim (both belong to the cabinet).

Opening to fan unit

The large opening with a breakthrough type blanket allows you to install and remove the Triton fan unit from the outside without ... screws.

Rollers, leveling legs, soles

The cabinet can be placed on leveling legs (accessories) or with optional equipment on foot, rollers or rugged rollers.

The back of the closet

There are two cable inlet openings on the back wall of the cabinet, covered with outlet panels. One is on top of the lid and the other on the bottom edge. The other cable inputs are located on the ceiling and at the bottom of the closet.

The perforation of the frame

The RMA cabinets have a perforated frame to ensure access to the cooled air to the built -in technology. Cooling fans can also be eligible.

Glue

All removable parts are glued to the requirements of the relevant standard.

Flexible frame

(Valid for 800 mm wide wardrobes) The system allows you to install the slide rails at 19 ", 21" and 23 ". Another option is to push the 19 -inch vertical rail to one side to make more space on the other side.

Middle vertical rail

For cabinets deeper than 800 mm, we deliver a third vertical rail pair to install the technology as a standard. Thanks to their open profile, they do not limit the installation of deeper equipment. Shorter devices can be mounted on the middle vertical rail using different types of consoles (optional accessories).

Widespread

Wide Vlasins are used to further install accessories such as power distribution units or vertical cable arrangement panels that do not occupy the 19 -inch units in the cabinet. Thanks to the design, power distribution panels do not limit the use of pull -out servers in cabinets 600 mm wide.

Accessories

The inner edges of the Vlas have full heights. The holes are located at the unit distance of the vertical rails and can be used to install certain types of accessories.

Optional accessories

RAC-VP-D5X-X1
Horizontal cable organizer panel. Installation in the cabinet frame (rail).

RAX-VP-VXX-X2
Vertical cable arranger panel. Installation in the wardrobe.

Nutritional units
Opportunity to install the PDU into the cabinet carrots using a console (optional accessory).

RAX-VP-XXX-X1 horizontal cable arranger
For cabinets with a load of more than 500 kg, we recommend incorporating the horizontal cable arrangement system into the frame,
which also serves as a confirmation.

Swinging frame
All 800