SUNLU PLA+ filament cherry 1.75 mm for FDM 3D printer PLA+ CR

SUNLU PLA+ filament in cherry red is designed for FDM 3D printers that use 1.75 mm filament. It combines a rich, deep colour with improved toughness, making it a practical choice for both functional parts and models where appearance and durability both matter. According to the manufacturer, its impact resistance can reach 8 kJ/m².

The filament has a stated diameter tolerance of ±0.02 mm, which supports steady material feed and consistent results. It is designed for low shrinkage and good layer adhesion, and it aims to reduce common issues such as clogging, bubbles and warping. The spool is wound evenly, so tangles and knots are less likely. Each spool holds 1000 g, equal to roughly 330 metres of filament.

The manufacturer lists compatibility with a wide range of FDM printers, including models from Bambu Lab, Creality, Prusa and Anycubic. Recommended settings are 50 to 100 mm/s at 195 to 205 °C, or 100 to 300 mm/s at 205 to 220 °C, giving flexibility to tune the profile for your printer and model.