STARTECH Wall mountable workstation 27-32"

Install this wall-mounted workstation to create an ergonomic seating-resistant desktop layout in areas where there is a limited space available for a traditional desk. Use in offices, warehouses, (animal) clinics or other limited places. Spring arms allow height to adjust the needs of different users and maximize ergonomic positioning.

Height adjustment with a single smooth gesture

Thanks to the mechanical springs in the monitor and keyboard arms, the height can be adjusted up to 31.5 cm with a single, light, single touch. For further settings, move the arms along the wall rail (88 cm) to access different height range.

Optimum adjustability

The VESA monitor support supports a single standard 27 "or 32" ultra-wide monitor with up to 10 kg, 75x75 or 100x100 VESA fastening patterns. The monitor holder can be tilted at +90 °/-20 °, rotated at +/- 90 ° and rotates up to 360 ° for vertical and horizontal orientation of the monitor.

The monitor is 61.3 cm and the keyboard tray extends 85.3 cm from the wall.

Keyboard and mouse holders

The workstation has a large keyboard holder (17.6x8.1 inches / 44.9x20.7 cm) and a pull-out mouse holder (8.5x8.4 inches / 21.7x21.3 cm) that can be drained and slipped into the keyboard to be suitable for right and left-handed users. The mouse holder and the wristrest are removable, so often touched surfaces can be cleaned, so it is ideal for shared workstations.

Release an additional floor area when the workstation is not in use by folding the workstation to the wall. Use the Velcro strips to secure the keyboard tray and store the mouse in the separate holder.

Desktop

Optimize the work area under the keyboard holder on the desktop computer house by mounting the attached console (2NS-CPU-Wall-Mount) on the wall. Enjoy unobstructed access to drive compartments, peripheral ports and wires by opening the computer holder.

The supplied spacers provide accurate fit for various CPU tower sizes, from 50-20 cm to most small (SFF) computers.

Technical data

Hardware

- Wall mounted: Yes
- cable arrangement: Yes
- Accessory tools: Yes
- Hinged: Yes
- Number of supported displays: 1
- Vesa bore sample (s): 75x75 mm, 100x100 mm

Performance

- load -bearing capacity (per display): 10 kg
- Filled Court Capacity: 3.5 kg
- Maximum display size: 27 " - 32" (16: 9)
- fits in with a curved display: no
- fits for ultra -wide displays: Yes
- height adjustment: yes
- Maximum height: 880 mm
- minimal carcass: 97 mm
- Maximum carcass: 613 mm
- Display tilt: +90 ° / -20 °
- Tilt of a keyboard: +90 ° / -20 °
- Rotate / rotation point: +90 ° / -90 °
- Display rotation: 360 °
- Theft protection: no

Physical characteristics

- Color: black
- Product height: 15.6 cm
- Product length: 54.8 cm
- Product Weight: 10.5 kg
- Product width: 88.0 cm
- Material: aluminum and steel
- Width of a keyboard: 464 mm
- Depth of keyboard: 248 mm

Special Notes / Requirements

- Standing mode is not supported for ultra -wide monitors (21: 9 aspect ratio).

The contents of the box

- 1 spring arm, display
- 1 spring arm, keyboard holder
- 2 rotary levers
- 2 mounting sheets, spring arm
- 2 upper ornamental pavements
- 2 rotary arm
- 2 lower ornamental pavements
- 2 spring lever column
- 1 wall fastener, rail
- 1 wall fastener, rail cover
- 1 keyboard mount
- 1 mouse holder
- 1 mouse holder adhesive sheet
- 2 self -adhesive velcro
- 1 mounting console, CPU holder
- 1 slide console, CPU holder
- 2 self-adhesive rubber strip, CPU holder
- 2 wall fasteners, CPU holder
- 2 plastic spacer, CPU holder
- 8 self-adhesive rubber spacer, CPU holder
- 4 self-adhesive rubber sheets, CPU holder
- 2 concrete wall anchors, CPU holder
- 2 hand buttons, CPU holder
- 2 pcs of 2.5 mm Allen key
- 2 5 mm Allen key
- 4 pcs M4 x 10 mm screw
- 4 pcs M4 x 6 mm screw, Allen key
- 2 pcs M4x6 mm screw, star-headed
- 8 pcs M6 x 8 mm screw
- 4 pcs M6 x 18 mm screw
- 6 pcs M5 x 4 mm fastener screw
- 12 pieces of concrete anchors
- 8 wall -mounted screws
- 6 wall -mounted slat bolt
- 1 pc 10 mm fork key