SENCOR SWS 2999 Meteorological station

The sencor sws 2999 weather station is suitable for indoor and outdoor measurement of humidity and temperature. The LCD display shows the exact time and date, as well as the current day of the week. It is possible to set a recurring alarm. It can transmit data up to a distance of 50 meters. Option to enter 12 and 24 hour time format, and the temperature can be displayed in °c and °f

Humidity display

The humidity of the given room is displayed using % values. The air in the room is dry if the values ​​are between 20 and 40%. Ideal values ​​are between 45 and 65%. If the displayed data falls between 66 and 95%, the air in the given room is very humid.

Save measured data

It is possible to save the minimum and maximum values, so you will always have accurate data. Data can be backed up in almost an instant.

Wake-up and snooze function

The sencor weather station is equipped with the snooze function that has become well-known by smartphones. If the alarm goes off at the set time, but you still want to sleep a little longer, just press the snooze button and rest longer. A few minutes later, the alarm will sound again.

Communication on a frequency of 433 mhz

The external and internal units of the sencor weather station communicate with each other via the 433 MHz frequency. The range of the radiation is approximately 30 meters between the transmitter and the station. During installation, it is important to note that devices operating at a similar frequency may cause interference.

Other features:

- Weather forecast icons (sunny, slightly cloudy, cloudy, rainy, snowy)
- Measurement of internal temperature and humidity
- Measurement of external temperature and humidity
- Max./min. save to memory
- Temperature displayed in °C / °F degrees
- Digital time and date
- 12 / 24 hour format
- Touch button on the display
- LCD display with white backlight that turns on for a short time
- Outdoor sensor low battery display
- The possibility of setting it on a table or hanging it on the wall
- Up to 3 sensors can be connected
- 1 sensor accessory (SWS TH2850-2999-3851-5150)
- The transmission distance between the main unit and the receiver is max. 50 m (open ground)
- Internal temperature measurement range: 0°C - +50°C
- External temperature measurement range: -20°C - +60°C
- Humidity measurement range: 20% - 95%
- Radiation frequency of the sensor: 433.92 MHz
- Power supply: 3 x 1.5 V AAA type batteries (batteries are not included in the package)
- Heat sensor power supply: 2 x 1.5 V AA type batteries (batteries are not included in the package)
- Dimensions of the main unit: (width / height / depth) 142 x 98 x 22 mm
- Weight of the main unit: 160 g
- Sensor size: (width / height / depth) 39 x 100 x 23 mm
- Sensor weight: 33 g