Premiumcord HDMI2.0 Wireless Signal Amplifier 4K@60Hz 50m in 5.2 GHz

- Supports 4K@60Hz and Full HD 1080P wireless transmission up to 50m
- fully supports HDMI2.0 and
- Supports HDCP1.4 and HDCP2.2
- Maximum transfer data speed: 18 Gbps
- Maximum resolution: 4K@60Hz Full HD 1080p or lower supported formats 1080i/720p/720i
- Maximum resolution: 3840x2160@24/30/50/60Hz, 1080p@50/60Hz, 720p@50/60Hz, 1920x1200, 2560x1440, 2560x1600
- transmits infrared signals to control source devices with an infrared remote control
- Both of them have a tax and receiver with a channel button that changes the transmission frequency, which allows several wireless devices to work simultaneously. Supports SSID pairing.
- Easy installation without additional software.
- Connectors on the tax: HDMI input, HDMI output to the local monitor and connector for IR control (attached with IR sensor cable).
- Connectors on the Customer: HDMI output connector to the remote monitor and connector for IR control (attached with IR sensor cable).
- The tax and the buyer contain two removable antennas.
- The tax has a local HDMI output connector for the local HDMI monitor.
- Delay less than 130-180 ms.
- operating temperature between -20 and 60 ° C.
- Humidity: 0-90% (non-dragged).
- Dimensions: Tax: 115 mm x 125 mm x 20.6 mm, reception: 115 mm x 125 mm x 20.6 mm.
- The signal amplifier is fed by the supplied 5V/2A network adapters.
- The transmission distance depends on the actual environment. -Survival Protection: ESD protection 1A contact discharge level 3, 1b air discharge level 3, standard: IEC61000-4-2

For accessories see the attached photo

"Four antenna
- Two power supplies
“Two IR cables
- instructions for use