The NRGKICK Standard (EU) connection plug contains a 16A 5-pin connection plug (max. 16A / 11kW), a 16A 3-pin connection plug (max. 16A / 3.7kW) and a "protective contact" connection plug (EU, max. 13A). These can be used to connect the filling unit to a standard household protective contact socket in the EU or to 3 and 5 pin CEE sockets. The maximum charging current can be up to 16 amps. The patented safety connection system of the NRGKICK filler unit offers temperature control and substrate protection. The connecting plug of the protective contact sockets has a dual temperature supervisor on both contacts. This allows NRGKICK to accurately know whether excessive heat is generated due to inadequately installed sockets. If the substrate is overheating, the NRGKick will completely control the charging current independently. The automatic removal sensing system completely eliminates the risk of arc formation when the connection plug is separated from the connection unit while charging; The current flow is interrupted before the contacts are separated at all. NRGKICK also senses whether a substrate has been incorrectly connected or installed, eg. If a second phase was connected to a three -phase socket instead of the zero driver. This allows you to alert the user to the substrate problem with the LED mark on the charging unit and the connection unit, preventing charging. The NRGKICK connectors are connected to the NRGKICKN, where an additional LED display is constantly informed of the filling unit. The nrgkick connectors click on their place tactile and safely, preventing accidental pulling. At the same time, the non -slip surface of the connection system, which is equipped with soft parts, ensures that the connectors can be removed quickly and easily when needed. NRGKICK is completely automatically detected and identified by the connectors. This ensures that the charging current does not exceed the maximum permitted value for the connectors.