The Montech HS01 Pro Midi-Tower is a restrained PC house with elegant ARGB lighting and particularly versatile assembly options. Cuts for the Back-Connect motherboards of the MSI Project Zero series or the ASUS BTF series allows almost invisible cabling. Since the cables are hidden on the back of the house, you can save time and nervousness.

- Smooth cable management with ATX motherboards and back-connect technology
-Optimal cooling with up to 11 pieces of 120 mm fan and a 360 mm radiator
- rotating design that allows the house to be placed left or right side by setup
- Elegant ARGB lighting, compatible with the most common motherboards
- Location for up to 400 mm long graphics cards with vertical installation

Optimal cooling with many fans and large radiators
Eleven 120mm fans and multi-mounted radiators provide optimum cooling of the hardware in the Montech HS01 Pro. Whether it's custom-cooled circles, a 360 mm AIO solution, or traditional air-crook-you can freely design the cooling system with this house. Five pre-installed 120mm fans provide the basis of the cooling system.

Elegant lighting and rotating design
Compatible ARGB lighting compatible with integrated, commonly used motherboards, the house is particularly excellent in Setupod. The illuminated strip runs through the front throughout the page and enrichs your configuration with colorful lights, either normal or upside down.

Thanks to the structure of the tower, your machine can be placed not only traditionally but also upside down. This allows your computer to be placed on the left side of your setup without seeing the back cover. This is also helped by the fact that the power supply is located in the upper right corner, making it easier to connect the motherboard back-connect.

Spacious interior for strong hardware
Due to the spacious interior of the Montech HS01 pro, especially strong, high-end configurations can fit comfortably. Modern Triple-Slot graphics cards can be placed in this house without any problems. Many fans provide abundant air flow, so your graphics card always gets optimally fresh air.

You can also decide whether to install the video card vertically or traditionally horizontally. Vertical assembly does not require extra accessories such as bracket. All you need is a PCIe Riser cable of the right length, for a while and a screwdriver to put the card in the desired position.

Practical Front I/O and Storage Options
The Montech HS01 Pro Front I/O panel consists of two USB 3.0 Type-A connectors, a USB Type-C connector and two 3.5mm jack sockets served for a microphone and a headphone. The Montech House does not save on storage: it provides two 3.5 "and four 2.5" drives, providing high-capacity storage for your configuration.