Medencetisztító robot 33W 90 minute 80m² White A10PS-WH-EU

Bublue A10 PS pool cleaning robot

Bublue A10 PS is a modern pool cleaning robot designed to remove dirt from the bottom of the pool and near the walls without manual intervention. Thanks to its high power (33 W), it effectively removes sand, leaves and small debris in a single cycle. It works wirelessly for up to 90 minutes, and thanks to fast charging, it's ready for the next cycle after about 3 hours. The DirtLock™ Tech 2.0 system effectively captures dirt in the filter basket, and intelligent wall detection makes it easier to move. In addition, the self-parking function allows you to conveniently remove the robot after completing its work. The whole thing is complemented by LEDs that indicate the status of the device.

Bluehole Technology™ - visible efficiency after one cycle

The high cleaning efficiency is due to the new Bluehole Technology™, which improves the cooperation between the nozzle, the motor and the suction wheel. Compared to previous solutions, this means up to twice the performance, as well as 3 times better leaf collection efficiency and 8.5 times more efficiency in removing waste between 3 and 8 mm in size (compared to the previous generation). As a result, one cleaning cycle is enough to restore cleanliness, without the need for manual vacuuming or repeated operation of the device.

Intelligent sensors, autonomous parking and clear LED signs

The Bublue A10 PS pool robot has been designed with maximum user comfort in mind, so it uses advanced touch sensors that allow a quick and accurate reaction to the pool walls. Corner Boost™ technology increases the intensity of cleaning in the corners, thus removing dirt in these critical areas with up to twice the efficiency. When it reaches the edge, the robot automatically corrects its trajectory, moving smoothly and without chaotic bouncing, resulting in smoother and more efficient cleaning at the bottom of the pool. At the end of the cycle, the device is parked against the wall of the pool, so it can be quickly and conveniently removed from the water. In addition, the built-in LEDs provide real-time information about the device's operating status, charge level and readiness.

Double filtration and DirtLock™

The dual filter system combines two levels of 80 and 150 mesh filters, effectively capturing both larger debris such as leaves and fine sand or sediment. This solution increases the average suction power by up to 15% and makes the water cleaner during the entire cycle. This is complemented by the DirtLock™ technology, which allows the water to be quickly drained from the robot in about 5 seconds, reducing maintenance time by up to 80% and almost 100% preventing the collected dirt from returning to the pool. In addition, the optimized basket design provides up to 30% more capacity compared to standard solutions, which means longer operation without frequent emptying.

Precise component interaction - stable suction performance throughout the entire operating cycle

The Bublue A10 PS has an optimized suction system in which the nozzle, motor and impeller work in complete synchronization. This design allows for a smooth flow of water and waste throughout the entire system without any drop in performance or sudden drop in performance. The precise coordination of these components results in stable, efficient suction for both small particles and larger waste, regardless of the level of contamination at the bottom of the pool. The result: smooth operation of the robot, better energy consumption and consistently high cleaning efficiency from start to finish.

Long run time and fast charging – ready to clean when you need it

The robot is equipped with a 4400 mAh battery that provides up to 90 minutes of uninterrupted operation, so you can thoroughly clean the bottom of the pool in a single cycle. After cleaning, the device recharges in about 3 hours, so it quickly returns to full readiness and does not require long breaks between uses. This combination of operating time and charging time makes the Bublue A10 PS the ideal choice for flat-bottom above-ground pools up to around 80m².

Easy maintenance – cleaning the robot without tools or effort

After finishing work, simply rinse the filter and the robot housing with a regular garden hose - no need to disassemble the device or use additional accessories. This cleaning method allows for easy removal of sand, leaves and small debris.

Package contents:

Pool cleaning robot
Charger
A hook to pull the robot out of the water
Handle
Brush x2
Instructions for use