Kerámiapor 2000g

It is suitable for casting a quick -bonding, fine (micro -drizzle) particle size, solid -solidified, hard -sized ceramic powder, detailed figures or objects.

-After bonding and drying, it will be slightly beige like the color of the burned white clay.
-After drying, they can be decorated with napkin technology, metal foil, acrylic paint, glue

Use:

Sprinkle the ceramic powder into cold water as long as it is absorbed and mixed with homogeneous (about 3 parts ceramic powder, 1 part water). Pour the cream-like mass into the mold within 3-8 minutes. The imprints can be accessed with surface patterns with lace, textiles, silicone seals or thick veins by securing it before casting or pressed into the surface after casting. 2-5 minutes are available for the use of the mass. After 15-30 minutes, press the tied figure from the shape and allow to dry at room temperature (a few hours or 1-2 days depending on size). We can decorate any of the hobby techniques.

General mixing data for ceramic powder:

- Approx. 1 dl of water approx. 300 g ceramic powder
- Mixing ratio (G/100 ml): 270-320
-Water ceramic powder value: 0.36-0.34

Important!

-The time of use of the thinner mass is slightly longer, but the hardness and fracture of the poured object decreases and its vulnerability increases.
-While mixing ceramic powder with water, dark/gray "spots" or ~ 1 mm may appear, sometimes the product may seem slightly more yellow, but this spot is no longer perceptible on the poured and dried object.