KARCHER 1.645-840.0 SP 17.000 Flat Level Sensor Clean water submersible pump 550W

Kärcher's most powerful submersible clean water pump pumps out up to 17,000 liters of clean or slightly polluted water per hour, making it perfect for pools, drainage shafts and water damage in buildings. In case of stronger dirt and in order to protect the pump impeller, it is recommended to use the stainless steel pre-filter included in the scope of delivery. The robust stainless steel housing and the slip ring seal make the pump particularly durable. It is also possible to extend the warranty to five years. The flat-suction submersible pump is equipped with an infinitely adjustable level sensor, which starts the pump immediately upon contact with water. The SP 17,000 flat level sensor also has collapsible support legs so that the submersible pump starts at a water level of 7 mm. With the switch, the pump can be set to continuous operation in manual mode. Reliably pump water down to a residual water level of 1 millimeter - both in continuous mode and in automatic mode if the level sensor is set accordingly. With the Quick Connect connection thread, it also enables the very easy connection of 1", 1 1/4" and 1 1/2" hoses.

- Measured absorbed power (W): 550
- Water delivery max. (l / h): < 17000
- Delivery temperature (°C): max. 35
- Transport height (m): 9
- Pressure (bar): max. 0.9
- Flat suction (to) (mm): 1
- Grain size (mm): max. 5
- Immersion depth (m): max. 7
- Run time (s): 15
- Min. residual water, manual (mm): 1
- Height of remaining water (mm): 1
- Connection thread: G1 1/2
- Pressure side thread size: G 1 1/2 inner diameter
- Power cable (m): 10
- Supply voltage (V): 230 240
- Frequency (Hz): 50
- Color: yellow
- Dimensions (length x width x height) (mm): 238 x 293 x 356
- Weight without accessories (kg): 6
- Packaging weight (kg): 7.3