With STRIKER Plus 4, it's now easier than ever to find fish. Mark your favorite spots and return to your dock or falcon with ease. Smooth Scaling™ provides uninterrupted drawing when switching between depths. You can simply look back at the sonar history, where you can punch down new waypoints to easily find your way back there. In addition, it shows the speed and has a built-in flasher function. It comes with a 77/200 kHz CHIRP transmitter as standard, but can be easily expanded with optional GT8 or GT15 transmitters.

Experience the clarity of CHIRP
The STRIKER Plus 4 fish radar comes with a Garmin CHIRP (77/200 kHz) transmitter, which apparently provides a higher level of clarity and detail compared to traditional 77/200 kHz transmitters.

Instead of sending out just one simple frequency, CHIRP transmits a continuously scanned range of frequencies, from low to high, and then evaluates them separately on return. Because it shows a wider band of information, the CHIRP transmitter provides sharper fish arcs and better target separation. You can upgrade your device to a high-performance CHIRP system, which provides a crystal clear sonar image and even better target separation, both in shallow and deep water.

Save locations using the high-sensitivity GPS receiver
Unlike common fish radars, STRIKER has a built-in, high-sensitivity GPS receiver, which determines its position quickly and accurately. More importantly, it allows you to save your favorite places so you can find them later. By following the recorded track, you can find your way back to the dock or harbor even in poor visibility.

Navigate the blind map with ease
Since the GPS of the STRIKER fish radar is highly sensitive, you can easily see your exact location on the map, even in relation to your saved waypoints and tracks. Using the waypoint map, you can easily avoid saved obstacles or navigate to wrecks and feeding places.

See your speed on the display
You can quickly and easily check your speed on the STRIKER display. It is a great aid to keep the right speed even in regulated waters.

Fish in one spot with the built-in Flasher
The STRIKER can also be used as a fish radar or flasher. If you stop, you can clearly see the bottom structure and when a fish swims in the beam of the beacon. You can even see the descent of the cast rig, as well as when a fish approaches.

- Easy-to-use, 3.5" diagonal fish radar with built-in high-sensitivity GPS receiver
- Fish radar, with which you can easily save places and return to the dock or port
- Comfortable, button operation
- CHIRP (77/200 kHz) transmitter accessory; transmission power 200W RMS/1600W peak-to-peak
- QuickDraw Contours map drawing with data from the depth gauge
- With a menu system in Hungarian