DELOCK Docking station station 1 x M.2 NVMe SSD + 1 x M.2 SATA SSD for SD Express (SD 7.1) card reader and klón function

This Delock docking station allows you to install an M.2 NVMe and an M.2 SATA SSD as well as an SD Express memory card and connect it via USB to a PC, laptop, tablet or smartphone. The included USB cables allow connection to a free USB port. The included USB cables enable connection via a free USB port.

SD Express slot
The SD Express slot allows you to read and write SD Express memory cards. SD, SDHC and SDXC memory cards can be used with UHS-I and UHS-II speeds.

Use all ports simultaneously
All three memories can be used simultaneously.

Cloning function without computer
The built-in clone function allows you to clone memory without using a computer. It is possible to clone from NVMe to SATA, SD to NVMe, SD to SATA and SATA to NVMe.

An ideal test tool
The memory is simply attached to the robust housing and can be used immediately. No screws, tools or accessories are required, meaning the SSD is easy to replace.

Attached power supply
The power supply, which is part of the package, is connected to the USB-C™ power connector and thus ensures the power supply of the docking station and the connected memories.

Comment

If you get a Windows error message after duplicating an M.2 SATA SSD bootable operating system to an M.2 NVMe SSD, you still need to install the missing drivers.

- Connector:
- 1 x SuperSpeed ​​USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ socket
- 2 x 67-pin M.2 M-key slots
- 1 x SD Express slot
- 1 x USB Type-C™ socket (power supply)
- Chipset: JMicron JMS581
- Supports the use of M.2 modules with PCIe (NVMe) based M or B+M key
- Supports the use of M.2 modules with a SATA-based B+M key
- Supports the use of NVM Express (NVMe).
- Supported by S.M.A.R.T. use
- Supports the use of TRIM
- Supports the use of DevSleep
- Supports Native Command Queuing (NCQ) technology
- Up to 10 Gbps data transfer
- SD 3.0 (UHS-I), SD 4.0 (UHS-II), SD 5.1 (UHS-II V90), SD 7.1 support
- Supports the use of UASP
- LED indicator light for power supply, access and copy status
- Suitable for booting
- Function button:
- 1 x clone button
- 1 x Main switch
- 1 x DIP switch for clone mode
- Dimensions (LxWxH): approx. 76 x 79 x 18 mm
- Hot Plug, Plug & Play