The universal, all-in-one AXAGON ADSA-FP3FASTport3 adapter with USB 3.0 and SATA 6G interface can be used to easily connect any SATA hard drive.
It supports all types of 2.5" HDD/SSD, 3.5" hard drives and 5.25" optical CD, DVD or Blu-ray drives.
Supports SATA, SATA II and SATA III hard drives without maximum capacity.
The current SATA III/6G interface allows you to use the speed of modern SSD disks.
The S.M.A.R.T. the connected hard drives can be monitored by reading information. It also supports shutdown of attached disks and adapter.
Even a layman can handle its use. The hard drive is connected to the adapter, which in turn is connected to the computer's USB port; the rest is done automatically.
The 2.5" HDD/SSD adapter receives enough power from the USB bus, so no other power supply is needed.

Properties:

- Fully compatible with USB 3.0 and backward compatible with USB 2.0.
- Supports the following transmission speeds: 12/480/5000 Mb/s (full / high / super speed).
- Supports 2.5" and 3.5" SATA III / II / I disks without limiting the maximum capacity.
- Meets the Serial ATA 3.1 specification (SATA/600) with a transfer speed of up to 6 Gb/s.
- Meets the Serial ATA 2.0 specification (SATA/300) with a transfer speed of up to 3 Gb/s (300 MB/s).
- Meets the Serial ATA 1.0 specification (SATA/150) with a transfer speed of up to 1.5 Gb/s (150 MB/s).
- The total bandwidth / transmission speed of the case is determined by the USB 3.0 interface used (theoretically 5 Gbit/s).
- Supports booting from SSD / HDD hard drives connected with a USB adapter.
- HDD automatic shutdown HDD automatic shutdown after 15 minutes of inactivity.
- HDD shutdown Stops the disk after removing the device or shutting down the PC.
- Possibility to connect the device thanks to the support of Hot Plug.
- Full Plug and Play support.
- Direct connection with USB 3.0 Type A male connector on a 22 cm long cable attached to the adapter.
- A blue, pleasantly bright LED indicates the establishment of a connection and flashes when data is being transferred.
- The power supply via the USB 3.0 bus is sufficient for up to 900mA on each USB port for 2.5" HDD / SSD.
- A compact, 12V-2A (24W) AC / DC power cable is connected to the power supply unit that powers the 3.5" hard disk or optical drive, the power cable of which is approx. 150 cm long.
- USB adapter dimensions: 71 x 44.5 x 14.3 cm
- Adapter weight only 38 g including USB cable.

Supported operating systems: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 or later, Windows Server 2003 / 2008 / 2012 / 2016 or later (all 32-bit and 64-bit Windows systems are supported), Mac OS X 10. x or later with Linux 2.6.x kernel or higher.

Note: Drivers are found in operating systems and are installed completely automatically. There is no need to install other drivers and they are not available.