Circular USB 3.2 Gen 1 (USB 3.0) hub. AXAGON HUE-P1AL can quickly and easily connect up to four USB devices to a laptop or computer. It has three USB ports and allows you to seamlessly connect any USB device, including pen drives or USB readers. The fourth, upper USB port is ideal for connecting a wireless adapter for better signal reception, or for simply inserting a flash drive with one hand. The rubber pad prevents it from sliding on the table. The fixed 1.2 m long USB cable is suitable for use with a desktop computer.

This compact multi-port hub handles the permanent connection of multiple external drives. The versatility of the USB hub is also increased by the built-in micro USB connector, which supports standard USB charging for mobile phones. With this additional power supply, for example, you can connect more external drives to your computer or increase the number of mobile phones that can be charged. The USB 3.2 Gen 1 standard allows a transfer speed of 5 Gb/s. The hub also charges phones and tablets operating at 1.5A/5V. So the hub can easily charge Android smartphone, Apple iPhone, Apple iPad and other devices.

Input:
• 1x USB 3.2 Gen 1 / SuperSpeed ​​USB port, USB-A male connector.
• Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.
• The USB-A male connector is 30 cm long and fixed to the cable.

Output:
• 4x SuperSpeed ​​USB ports, USB-A female connector.
• Supports the following transmission speeds 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ / High / Full / Low speed).
• The total throughput / transmission speed of the station depends on the USB 3.2 Gen 1 interface used (theoretically 5 Gbit/s).

Properties:
• Possibility to connect the device thanks to the support of Hot Plug.
• Full Plug and Play support.
• Support power saving mode.
• High-quality shielded cable ensures fast communication speed and minimizes unwanted noise.
• The blue LED indicates connection to the computer's USB port.
• Dimensions Ø 60 x 18 mm.
• Weight 73 g (including cable).
• 1.2 m USB cable.

How to power the hub via a USB cable (bus power):
• The power supply of the USB bus is sufficient to connect a low-energy USB device (mouse, keyboard, card reader, flash drive, etc.) or devices with their own power source (printer, scanner, 3.5" external disk) to all four ports.
• In this power supply mode, the USB hub can operate with up to two magnetic 2.5" external disks at the same time.
• Charging mobile devices with a current of up to 1.5A (including the iPad) at each distribution port. The total charging current (which is divided into ports) reaches 2.5 A at 5 V (depending on the capabilities of the computer's USB port).

How to power the hub via USB + external USB charger (self-supply):
• Built-in micro USB connector for additional power supply to the hub.
• The wall charger of any mobile device with a micro USB connector (not included) can be used (the recommended output current of the charger is at least 2A).
In this power supply mode, the USB hub can work with up to two magnetic 2.5" external disks at the same time. Recommended for connecting to smartphones and tablets.
• Charging mobile devices with a current of up to 1.5A (including the iPad) at each distribution port. The total charging current (which is divided into ports) reaches 4.5A at 5V (depending on the capabilities of the external wall charger).

Supported operating systems:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 or later, Windows Server 2003 / 2008 / 2012 / 2016 or later (all 32-bit and 64-bit Windows systems are supported), Mac OS X 10.4.x or later , Linux with kernel 2.6.x or higher, most Android versions.
• Note: The drivers are part of the supported operating systems and their installation is fully automatic. There is no need to install other drivers and they are not available.

Package contents:
• SuperSpeed ​​USB hub with fixed 1.2 m cable,
• printed installation manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA,
• equipped with an opening for hanging on a shop rack.