YSHIELD PSA can be applied with a paint roller, like wall paint. The thicker the layer, the stronger the adhesion. When gluing wet, work quickly and on small surfaces, so you can still improve.

In the case of dry gluing, an immediate, very strong adhesion is achieved, which cannot be removed. It is best to work with a squeegee (e.g. FVR10), which allows materials to be applied evenly and smoothly to the wet or dry adhesive layer.

Our SAFEBUILD products with an aluminum layer are difficult to glue on their aluminum side, traditional wallpaper adhesives do not stick to them. This is not a problem for YSHIELD PSA as it combines adhesion and permanent adhesion.

Due to the high adhesion (initial adhesion), materials stick very well, even when the glue is still wet. If the edges or corners come off during drying, thanks to the constant adhesion, they can be simply pushed back with the help of the rubber pad.

Never wash the paint roller, for storage wrap it airtight in plastic film, let it dry and throw it away after finishing the job.

Components
Acrylic dispersion, additives, preservative. Contains BIT (1,2-benzisothiazolin-3-one) and INN (zinc pyrithione) for preservation.

Storage
Store in a cool, frost-free place, away from children.

Removal
Only throw empty containers into the selective waste bin. Throw away the dried material residues as household waste. Never allow liquid or dry product to enter the drain, as it will immediately clog the pipes.

- YSHIELD PSA is a water-based, low-emission, acrylate-based adhesive that provides permanent adhesion to YSHIELD shielding products
- 5 liter packaging
- Coverage: 5 m²/l when applied in one layer
- Sd value: 0.02 m (permeates water vapor very well)
- Viscosity: 3500 mPas
- PH value: 4
- Solid content: 65 %
- Minimum film-forming temperature: 0 °C
- Frost resistance: must be protected against frost
- Color: wet white; yellowish transparent after drying
- Suitable for our SAFEBUILD U230, A190, K150 products, our M6L magnetic shield plates and many other products