Woolley's WiFi light switch is a real specialty, as the radar motion sensor installed behind the glass front panel with touch switch detects even the smallest movement, and based on the detected movement, it can turn on or turn off the lamp (or other connected consumer) and can also send an alarm to the detected movement. about movement. As a close relative of the Sonoff brand, Woolley uses the eWeLink app and cloud platform just like Sonoff, so Woolley products can be used with the eWeLink app together with Sonoff, SmartWise and KingArt switches.

This is the 3-button version for switching three lights / circuits, with a white glass touch face, without a frame.

It is equipped with an elegant, frameless white glass front panel with 3 touch switches. Thanks to its built-in WiFi chip, the eWeLink app running on an iOS (Apple) or Android mobile phone with an Internet connection can be used to remotely control the on/off of the light switch and set a timed on/off. With the help of the touch switch, you can of course also switch on the lamp on the wall, just as you would with a traditional touch switch. The possibility of remote access can also be shared with family members. The perfect solution for smart control of any lamp. With its use, you can comfortably turn on or off the desired lights from a distance, even when you are not at home. Used as a break-in prevention solution, it can be programmed to turn on or off so that the outside world thinks you are at home.

The Woolley WiFi smart switch does not contain an RF receiver, so it cannot be paired with RF wireless switches.

You can choose from four operating modes in the eWeLink app for WiFi and after pairing with a phone:

- Motion sensor switched off, then the radar motion sensor switch behaves as a basic WiFi smart switch similar to the Sonoff TX T1 EU,
- Motion detection mode: when movement is detected, the switch turns on, and if no movement is detected after a specified time, it turns off. This is a fully automatic mode, e.g. recommended for offices, busy corridors and places where the switch is inside the room;
- Energy-saving mode: in this case, the switch-on is not automatic, but if the switch is turned on on the wall touch switch and no movement is detected for the time specified in the settings, it switches off. This is therefore an energy-saving mode that should be activated on all switches where the switch is inside the illuminated room;
- Push warning mode: alarm mode: in this case, the radar motion detector does not turn the switch on or off, it only sends an alarm to the phone running the eWeLink app about the detected movement. In this mode, the switch works as a hidden motion sensor.

The motion detection and energy-saving mode can be set separately for each circuit. (The push alert applies to all circuits.)

Like the Sonoff TX switches, the Woolley motion sensor switch can also be switched to pulse switching (i.e. rocker switch) mode, and it can also be set to switch off after a predetermined time after switching on, i.e. it is also suitable for stairwell timed switching.

Similar to the Sonoff TX switches, the versions of the two- and three-button chandelier switches can be set in the app to a so-called interlock (also known as locking or switching) mode, in which when one circuit is switched on, the other circuits are switched off. (In interlock mode, the timing functions are currently not available in the eWeLink app.)

Product features:

- Touch switch on the touch switch with a glass front, a discrete blue LED light indicates the touch part and a separate LED indicates the active WiFi connection (the WiFi LED can be turned off in the application)
- Built-in radar motion sensor super sensitive built-in motion sensor, approx. With a detection distance of 6-8 meters, which detects even the slightest movement and can switch or the eWeLink app sends an alarm to the phone based on this.
- Size according to EU and Hungarian standards: the front panel of the switch is 86x86mm, which is the size of the front panel according to the Hungarian standard, its total depth is 34mm, i.e. it can be placed in a wall socket with a normal depth
- 86mm row distance two Sonoff TX switches placed close to each other need as much space as two traditional one-button switches, because due to the glass front, two switches next to each other do not have a common double frame
- Hungarian-language mobile app Free iOS and Android mobile app: eWeLink, also in Hungarian
- Status query The mobile App shows the current status of the relay (on or off)
- Switching ON/OFF with remote control Wherever you are, from now on you can switch the relay (and devices connected to it) on or off remotely from the mobile phone app via the Internet.
- Timing Several timing functions are available: setting a specific time, setting repeated times, countdown / timer, cycle.
- Timed switch-off can also be set for a certain time after each switch-on