Spring protector suitable for trampolines with a diameter of 305 cm.

Length of springs: approx. 18 cm (usually 178 mm from hook to hook).

If the springs are longer: the spring guard will not completely cover the springs when jumping.

If the springs are shorter: the spring guard will hang over the springs inwards. It doesn't cause any particular problem.

The posts of the trampoline must be located outside the spring guard (in some brands, the posts are located "through" the spring guard), the spring guard does not have a hole for the post.
The spring guard can also be used for trampolines with an inner mesh (e.g. for tying under or above the spring guard) or with an outer mesh (a protective net pulled over the poles).

This spring protector is primarily manufactured for CRANE (e.g. also available at Aldi), ROYALBEACH and older SPARTAN (the newer ones are equipped with a 138 mm spring) trampolines, but PLUM (e.g. also available at Tesco), AGA and other brands that meet the above parameters can also be used for trampolines.

- Color: blue
- Approx. 32 cm wide and 10 cm wide border (hangs on the outer part of the frame)
- The upper part is covered with UV-resistant (500 g / m2) PVC
- The lower part is polyethylene material with a density of 130 g/m2, laminated on both sides
- Sponge coating: with 21 mm material thickness, EPE sponge coating, in a layer of 16+5 mm