The frame of the Solarix LC-18 rack is characterized by high strength and rigidity. On the front side of the rack there is a metal door with two hinges and a metal lock with a pin key. These sheet metal doors are complemented by perforations for passive ventilation of the equipment in the rack. A
cable entry is possible through pre-made holes on the back of the rack and on each wall. There are holes prepared for wall mounting on the back of the rack.
The dimensions of the 19" frames are 4U and 11U in the vertical direction, and 2U in the horizontal direction.
The prepared holes on the cabinet and frame determine the positions during assembly. If the frame is flush with the door, the door opening angle is approximately 110 degrees, or if the door protrudes from the frame, the door opening angle is 180 degrees.

- External dimensions 550x550x150 mm
- 3 pairs of vertical 19" rails for mounting 2U, 4U and 11U devices included
- The door can be opened at an angle of 180°, it can be closed on the right or on the left
- Perforated entrance door with 1-point padlock
- Cable entries at the bottom, top and back
- 4 x 6.5 mm diameter holes on the back for wall mounting
- Ground cable that connects the body of the cabinet to the door
- Load capacity 30 kg
- Protection class: IP 20