Shelly Plug S Gen3 is one of the smallest-sized Wi-Fi smart console, Shelly's 2024 product. It is so small that you will hardly notice it as you plug into the socket. Thanks to its small size, you can even plug a Shelly Plug S Gen3 into each other. Since this is a plug & play product, which is very simple, it only takes a few minutes: you just need to plug into a socket and pair with Shelly Cloud's free smartphone app and use it after pairing.

Despite its small size, up to max. Consumers with 2500W power can also be controlled, and with a built -in power meter you can also use the power consumption and consumption of controlled electrical consumers!

In fact, the LEDs on the plug s Gen3 socket version not only indicate the state on/off, but also set the socket to illuminate the LEDs in different colors based on the amount of current consumption. But we can even turn off the LEDs if they disturb us, for example in the bedroom. But the LEDs also support the night mode, set up to illuminate at night with smaller brightness, or even provide a signal light at night.

Pairing with a mobile phone App is done in Plug S Gen3 with Bluetooth, and after turning on the WiFi router, you will see the status of the socket from a remote, turn on/off the connector (and the electrical devices connected to it), and many (up to 50) offline timing. You can control a wide variety of electrical devices, even in a power-up floor lamp, even in home simulation mode, so that the outside world can see at home every night.

Plug s Gen3 can also be used to eg. In case of perceived consumption, send a notification to your phone or even by email.